Announcement
Collapse
No announcement yet.
pupildel : 1993 Accord LX
Collapse
X
-
so i decide to just not worry about my car until i get a new radiator support and front end fix once that happen than i will worry bout the tranny working right there is no point on getting stress out and depress about something like the cars not running in time it will run again but until than we going to try a pay another car for the mean time
Comment
-
i been out for a bit so here my updates so far..so after the transmission rebuild i was put the trans bach on and had everything put back together went i realize i didn't have reverse so i decided to get a new front end so everything would line up good finish my wire tuck move battery to the trunk convert my rack to manual etc.. so here are some pics of the disassemble of the front end also a few new parts i got
out with the old leaky radiator and bend radiator support
now some new goodies
new radiator support and new radiator
some new corner
more coming still trying to find a shop to spot weld the radiator support back on still got to reopen the trans and assemble everything back upLast edited by pupildel; 02-17-2013, 07:54 PM.
Comment
-
ok here is more updates finish the wire tuck and relocation of the fuse box
first thing to come out was the ac stuff this thing was dirty AF
what im left with
damn thats a lot of wires
what im left with at the end of the night
and the finish
also measure out my bmw battery cable its perfect length for the relocation of the battery all i need is to route the cable under the carpet and buy some wires for the ground and starter
Comment
-
update
finish wire tuck fuse box is inside battery in the trunk
took motor out for a few reason 1. im putting new oem seals and gaskets on the motor
2. the shop that welding my radiator and trans mount wants the motor out
my work space inside my house
first time in month my car been out of the driveway looks so sad i forgot how low my car is lol
Comment
-
so here is a little update as can see i been busy
took dash out to redo my drive side wire tuck
here with Nightwolf working on my cb
also took a trip down to the Honda dealership OEM PARTS FTW!!!!
4 page of parts
while i wait on parts to arrive doing the bb6 cluster retro fit and trying get the cb to the shop to get the new radiator support and trans mount welded on
Comment
-
alright!! alright!! alright!!!
Got the motor done and put back together..Here are the before and after
got timing job done
intake side done
Intake Manifold with euro r TB and H22a injectors
send the cb out to the shop
i love having a friend thats a tow truck driver
at the shop dropping her off
got the bb6 retro fit done
got her back from the shop radiator support in and trans mount and paint the bay
Last edited by pupildel; 05-03-2013, 01:51 PM.
Comment
Comment