CB7Tuner Forums

Go Back   CB7Tuner Forums > Beginner forum -- New members post here! > Beginner Audio/Electronics

Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 09-18-2019, 11:45 AM   #1
Join Date: Nov 2013
Location: Vancouver, WA
Posts: 18
K2theM is cool... so far.
Installing Keyless - Missing some wires

I have a 1990 EX that I just installed an aftermarket Keyless entry system in. Through other threads on this forum I found various guides and wiring conversions that were really helpful. I was able to successfully install the module and have fully functioning remote Lock/Unlock + Parking Light Flash (Kinda wish it was Hazard flash instead of Parking... but it works).

However, I'm missing on a couple things that I would like to have:
  1. Where is the Horn wire? It's supposed to be a Light Green/Blue wire in the steering column harness. However I was not able to find it. Maybe I was looking in the wrong spot?
  2. I have power windows, and the module has an Auto Window Up function. How do I properly hook this up? I've read some places that say I'll need a separate module to control this, and others that say to just run four wires from the window control board to the module. Which is correct?

The module also has trunk pop functionality, but I know I'll need to rig up a separate solenoid or swap out the catch unit to make this work. I'll tackle that another time.
K2theM is offline   Reply With Quote

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -5. The time now is 08:31 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.