CB7Tuner Forums

Go Back   CB7Tuner Forums > Site Features > DIYs

Reply
 
Thread Tools Rate Thread Display Modes
Old 12-12-2019, 08:07 AM   #1
wtfisafleek
CB7tuner Member
 
Join Date: Sep 2017
Location: Mesquite, TX
Posts: 259
wtfisafleek is cool... so far.
Need to swap a driveshaft? FYI

Both sides for the CB7 are available from Honda again. For the last couple years only one side was available. I'm seeing both again now, albeit with a slightly higher price ($292 on Hondapartsnow.com).
__________________
My '91 LX build. Bought September 2017. Sold June 2020.
http://www.cb7tuner.com/vbb/showthre...r /> t=209871
Current mileage: 399450 5/18/2020

My '92 LX build. Bought Novemeber 2019. http://www.cb7tuner.com/vbb/showthre...91#post3293791
Current mileage: 422679 11/21/19
wtfisafleek is offline   Reply With Quote
Old 12-12-2019, 11:25 AM   #2
fleetw00d
Contributing Member
 
Join Date: Mar 2007
Location: Southwest Ohio
Posts: 2,938
fleetw00d is very helpful fleetw00d is very helpful
Is that remanufactured, or new? Pretty pricey. Majestic doesn't show them as available. Note: Left and right are the same axle for 5 speed cars.
__________________
90 LX 4dr 5 spd 385,000 - MRT: http://www.cb7tuner.com/vbb/showthread.php?t=201450
07 Element EX AWD 192,000 - MRT: http://www.cb7tuner.com/vbb/showthread.php?t=210623
07 Element EX AWD AT (2) 87,000 - MRT: www.cb7tuner.com/vbb/showthread.php?t=211920

LOTS of CB7 parts - ENTIRE COLLECTION - FREE
Come and get it.
http://www.cb7tuner.com/vbb/showthread.php?t=192583 or watch for banner ad at upper right

Last edited by fleetw00d; 12-12-2019 at 11:29 AM.
fleetw00d is offline   Reply With Quote
Old 12-12-2019, 03:06 PM   #3
wtfisafleek
CB7tuner Member
 
Join Date: Sep 2017
Location: Mesquite, TX
Posts: 259
wtfisafleek is cool... so far.
I'd assume they're new. Every part I've ever gotten from them was new, and there's nothing to indicate they're reman'ed.

Quote:
Originally Posted by fleetw00d View Post
Note: Left and right are the same axle for 5 speed cars.
So which one is unique to the Automatic cars?
__________________
My '91 LX build. Bought September 2017. Sold June 2020.
http://www.cb7tuner.com/vbb/showthre...r /> t=209871
Current mileage: 399450 5/18/2020

My '92 LX build. Bought Novemeber 2019. http://www.cb7tuner.com/vbb/showthre...91#post3293791
Current mileage: 422679 11/21/19

Last edited by wtfisafleek; 12-12-2019 at 03:13 PM.
wtfisafleek is offline   Reply With Quote
Old 12-12-2019, 04:08 PM   #4
fleetw00d
Contributing Member
 
Join Date: Mar 2007
Location: Southwest Ohio
Posts: 2,938
fleetw00d is very helpful fleetw00d is very helpful
Manual cars use the half shaft across the back of the engine block, the left axle plugs into that. On automatics, there is no half shaft; the axle goes all the way from the transmission housing to the knuckle. When you go to select parts on the site, you would have to select an automatic model to see the automatic (left) axles.

In the past I have seen things like remanufactured brake calipers and steering racks on Honda part sites - they were identified as such.
fleetw00d is offline   Reply With Quote
Old 12-12-2019, 04:22 PM   #5
steelbluesleepR
I shoot people
 
Join Date: Aug 2005
Location: St. Louis, MO
Posts: 3,745
steelbluesleepR seems to have made some friends!
Quote:
Originally Posted by fleetw00d View Post
Note: Left and right are the same axle for 5 speed cars.
That's not true. The inboard joint of the passenger side has a sealing surface that the driver's side doesn't have, and the overall length varies between the two sides by a little over a half inch
__________________

Click for my Member's Ride Thread
Quote:
Originally Posted by Stephen Fry
'It's now very common to hear people say, "I'm rather offended by that", as if that gives them certain rights. It's no more than a whine. It has no meaning, it has no purpose, it has no reason to be respected as a phrase. "I'm offended by that." Well, so fucking what?' —Stephen Fry
Eye Level Media - Commercial & Automotive Photography: www.EyeLevelSTL.com
steelbluesleepR is offline   Reply With Quote
Old 12-12-2019, 04:22 PM   #6
wtfisafleek
CB7tuner Member
 
Join Date: Sep 2017
Location: Mesquite, TX
Posts: 259
wtfisafleek is cool... so far.
Ah yes I see now. I switched back to viewing the AT parts and there's a more expensive shaft that pops up now, $354. Looks like the only difference between the different part numbers for identical sides is the origin of manufacture.

As far as differences in the MT driveshafts, if I remember correctly the splined ends differ as well. One side was splined the full length of the outer section, the other was splined maybe half of its length. I can confirm later.
__________________
My '91 LX build. Bought September 2017. Sold June 2020.
http://www.cb7tuner.com/vbb/showthre...r /> t=209871
Current mileage: 399450 5/18/2020

My '92 LX build. Bought Novemeber 2019. http://www.cb7tuner.com/vbb/showthre...91#post3293791
Current mileage: 422679 11/21/19

Last edited by wtfisafleek; 12-12-2019 at 04:25 PM.
wtfisafleek is offline   Reply With Quote
Old 12-12-2019, 04:36 PM   #7
steelbluesleepR
I shoot people
 
Join Date: Aug 2005
Location: St. Louis, MO
Posts: 3,745
steelbluesleepR seems to have made some friends!
Quote:
Originally Posted by wtfisafleek View Post
Ah yes I see now. I switched back to viewing the AT parts and there's a more expensive shaft that pops up now, $354. Looks like the only difference between the different part numbers for identical sides is the origin of manufacture.

As far as differences in the MT driveshafts, if I remember correctly the splined ends differ as well. One side was splined the full length of the outer section, the other was splined maybe half of its length. I can confirm later.
the outer joints aren't different, just the overall length and inboard joints.
__________________

Click for my Member's Ride Thread
Quote:
Originally Posted by Stephen Fry
'It's now very common to hear people say, "I'm rather offended by that", as if that gives them certain rights. It's no more than a whine. It has no meaning, it has no purpose, it has no reason to be respected as a phrase. "I'm offended by that." Well, so fucking what?' —Stephen Fry
Eye Level Media - Commercial & Automotive Photography: www.EyeLevelSTL.com
steelbluesleepR is offline   Reply With Quote
Old 12-12-2019, 08:31 PM   #8
fleetw00d
Contributing Member
 
Join Date: Mar 2007
Location: Southwest Ohio
Posts: 2,938
fleetw00d is very helpful fleetw00d is very helpful
Quote:
Originally Posted by steelbluesleepR View Post
the outer joints aren't different, just the overall length and inboard joints.
At least for a 1992 LX 5 speed sedan, Majestic's site shows the same part number for both sides.
fleetw00d is offline   Reply With Quote
Old 12-13-2019, 08:05 PM   #9
steelbluesleepR
I shoot people
 
Join Date: Aug 2005
Location: St. Louis, MO
Posts: 3,745
steelbluesleepR seems to have made some friends!
Quote:
Originally Posted by fleetw00d View Post
At least for a 1992 LX 5 speed sedan, Majestic's site shows the same part number for both sides.
I just looked at their site and it appears they have a mistake on their site. both left and right side parts are listed as "Set, Shaft Comp R 44010-SM4-A12," even though the inboard joints have different part numbers. They are definitely different.
__________________

Click for my Member's Ride Thread
Quote:
Originally Posted by Stephen Fry
'It's now very common to hear people say, "I'm rather offended by that", as if that gives them certain rights. It's no more than a whine. It has no meaning, it has no purpose, it has no reason to be respected as a phrase. "I'm offended by that." Well, so fucking what?' —Stephen Fry
Eye Level Media - Commercial & Automotive Photography: www.EyeLevelSTL.com
steelbluesleepR is offline   Reply With Quote
Old 12-18-2019, 06:53 AM   #10
wtfisafleek
CB7tuner Member
 
Join Date: Sep 2017
Location: Mesquite, TX
Posts: 259
wtfisafleek is cool... so far.
I'll definitely be calling them before I order anything.
__________________
My '91 LX build. Bought September 2017. Sold June 2020.
http://www.cb7tuner.com/vbb/showthre...r /> t=209871
Current mileage: 399450 5/18/2020

My '92 LX build. Bought Novemeber 2019. http://www.cb7tuner.com/vbb/showthre...91#post3293791
Current mileage: 422679 11/21/19
wtfisafleek is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 07:37 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.