CB7Tuner Forums

Go Back   CB7Tuner Forums > Parts & Performance > Suspension > Brake Performance

Reply
 
Thread Tools Rate Thread Display Modes
Old 03-19-2018, 09:44 PM   #1
wtfisafleek
CB7tuner Member
 
Join Date: Sep 2017
Location: Mesquite, TX
Posts: 170
wtfisafleek is cool... so far.
Vigor brake swap - will the whole knuckle swap over?

Reason I ask is I'll be replacing pretty much all of my front suspension anyway, so it would be easier for me to just swap in a Vigor knuckle with it's bigger caliper/rotors all in one fell swoop.

If a bearing or two is bad, I'm fine with that. I can just tear it back apart and swap those out. But since I have everything apart I think it's worth a go if the knuckles are the same.
__________________
My '91 LX build. Bought September 2017.
http://www.cb7tuner.com/vbb/showthread.php?t=209871
wtfisafleek is offline   Reply With Quote
Old 04-24-2018, 08:31 AM   #2
ukemike
CB7tuner Member
 
Join Date: Feb 2015
Location: Marin County, CA
Posts: 147
ukemike is cool... so far.
Should work fine. I did that with '99 CL knuckles. I got the bigger brake diameter with the rotor over hub and kept the 4 bolt pattern.

If you have the stock drums, do the rear brakes too. When I did it I ended up with too much forward brake bias and the fronts would lock up too easily. Unbalanced brakes really hurt brake performance, and can make it handle badly under braking.
__________________
==========================
1991 Accord LeMons Race Car, "The Minnow"
Neuspeed Race Springs, Koni Str.t "Orange", Acura CL Rear Sway Bar,
Adjustable Upper Control Arms -3.0deg front, -2.0 deg rear
M2A4 Transmission, Cusco 1-way Limited Slip Differential, Stage 2 Clutch and 11lb flywheel.
A4 Header and Downpipe, 2" exhaust all the way back, catalyst delete, glasspack muffler, PT12 ECU.
Acura CL3.0 Brakes Front and Rear, Raybestos St43 Pads, Redline 600 Brake Fluid
ukemike is offline   Reply With Quote
Old 04-25-2018, 04:55 PM   #3
NH-503P-3
CB7tuner Member
 
Join Date: Aug 2017
Location: Piñon Hillbilly/SoCal
Posts: 122
NH-503P-3 is cool... so far.
Are the 3.0 CL or Vigor rear calipers larger than the standard CB calipers?
__________________
5 studded & leather clad-Praise The Lowered

~Mark~
NH-503P-3 is offline   Reply With Quote
Old 05-04-2018, 07:15 PM   #4
Corweena
CB7tuner Member
 
Join Date: Dec 2013
Posts: 253
Corweena is cool... so far.
Quote:
Originally Posted by NH-503P-3 View Post
Are the 3.0 CL or Vigor rear calipers larger than the standard CB calipers?
They really won't be that much larger if they are. Honda used almost the same rear caliper across a ton of models in the 90s and early 00s.
Corweena is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 10:36 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.