CB7Tuner Forums

Go Back   CB7Tuner Forums > Beginner forum -- New members post here! > Beginner Technical/Performance

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 07-09-2018, 07:07 PM   #1
joey_crandall
Newcomer
 
Join Date: Jul 2016
Posts: 17
joey_crandall is cool... so far.
Wheel rubbing sway bar endlink

It only happens in reverse with the steering locked to the right, doesnt do it on the left side. Car had new control arms, ball joints and outer tie rods. Plus a rotor over hub conversion with 94 prelude vtec breaks and wheels, all parts were new ither than wheels.

I did the ghten everything to spec was thbthebtires on the ground. Car also always seems tonwander tonthe left and wont align into spec on the right side, front and rear

joey_crandall is offline   Reply With Quote
 

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 09:54 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.