Glass polishing

[TypeG]

stop using plastic polish on glass. it isn't made for that. there's a reason they make dedicated polishes for specific uses.

go to eastwood.com and get a glass polishing kit. you can't just go in autozone and buy glass polish.

see this thread, it's dead on:
http://www.cb7tuner.com/vbb/showthre...t=glass+polish
later.

[Bad_dude]

I had one of these that I found today. Would it work?
http://www.harborfreight.com/auto-gl...ads-67603.html

Thanks.

[keepinitclean]

I wouldn't recommend those, they might but hey I don't want you to risk F*ckin up your windows

[keepinitclean]

Sealer is what makes it shine, it comes separately... MAKE SURE THAT YOU WET-SAND WITH PLENTY OF WATER!!

You just go in circle motions with barely any pressure, if you wet-sand something it won't leave lines if you do it properly

[xkjnboix]

I use the sandpaper and the Plastix but it leave some haze on my driver's side windows. Am I doing something wrong?

Thanks.

using sand paper with polish is defeating the point of polishing/clearing the glass. it will however CLEAN the window but hazing will remain from scratching after the glass dries.

just think about it. would you polish your gauge cluster clear plastic by method of sand paper with plastic polish at the same time ?

Not to knock the OP's method but IMHO
The proper way to do it is, use the sandpaper either with soapy water or polish and THEN go BACK and polish the glass with a microfiber pad and some glass polish. Just like polishing anything else, even the surface then polish but not both at once.

[keepinitclean]

I guess everyone has their own way