DC Sports Replacement Crush Type Gaskets

[H311RA151N]

I just installed a DC Sports header and need to remove it due to a faulty oil pan gasket (great timing I know).

I need to replace the crush type gaskets between the header and downpipe.

I would assume these are the same as OEM for the EX/SE PN: 18212-SB2-961 but I'm not for sure.

Any help would be appreciated.

[Losiracer2]

I just installed a DC Sports header and need to remove it due to a faulty oil pan gasket (great timing I know).

I need to replace the crush type gaskets between the header and downpipe.

I would assume these are the same as OEM for the EX/SE PN: 18212-SB2-961 but I'm not for sure.

Any help would be appreciated.

you can reuse them without any issues, if they're the O-ring style OE gaskets. They expand and tighten up around the flange with the heat to seal and contract when cool so they're a loose fit when installing.

[H311RA151N]

you can reuse them without any issues, if they're the O-ring style OE gaskets. They expand and tighten up around the flange with the heat to seal and contract when cool so they're a loose fit when installing.

Never heard of this. I bought some I hope fit. But if they don't looks like I'll be reusing the one it came with. Thanks for your help.

[H311RA151N]

For future reference...

Email I received today.

Directly from DC Sports.

We use the OEM crush ring gaskets. They are available from any Honda dealer.

Best Regards,
Staff@DC Sports
13000 Temple Ave
City of Industry, CA 91746
A division of the Pilot Automotive Group
info@dcsports.com
www.dcsports.com
(626)968-5147 Phone
(626)968-5142 Fax

PN: ---------- 18212-SB2-961

[Corweena]

I figured it out the hard way a few years ago lol

http://hondasociety.com/board/showthread.php?t=154586

[H311RA151N]

Yep I'd say so. It's funny how similar our posts are.