CB7Tuner Forums

Go Back   CB7Tuner Forums > Parts & Performance > Suspension > Brake Performance

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 05-27-2019, 12:52 AM   #1
djALBINI
Gold Member
 
Join Date: May 2016
Location: Miltown
Posts: 71
djALBINI is cool... so far.
rl caliper bracket question

got an rl caliper mounted up to a 01 accord ex knuckle and having the 350z brembo rotor make contact with my caliper on the inner portion on the passenger side. the driver side bolts right up with no issues.

The brake pad can be pressed in but it is very very tight and wheel wont move really at all because the pressure applied to the rotor is too great after..

Thought about mounting up a hardened 1mm washer or spacer sandwiched in between the knuckle mounting tab and the inside of the ffc rl bracket to clear the offset...


anyone else have this issue or heard about someone else having this problem? I thought about just mounting it up and saying f it but not really a fan of that.
djALBINI is offline   Reply With Quote
 

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 10:05 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.