Announcement

Collapse
No announcement yet.

SUSP: Front 5-lug Conversion

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    they don't suck, but they will NOT perform at it's full potential from what they are designed to from the factory. they are still tons better than your OEM brakes.

    read more here:
    http://www.cb7tuner.com/vbb/showthre...legend+caliper

    back on topic, i never knew 6th gen front 5-lug knuckles would fit! good stuff! the rear you can keep a drum setup (though i wouldn't).
    http://www.cb7tuner.com/vbb/showthread.php?t=146386
    Last edited by timmy0tool; 03-20-2012, 09:44 PM.
    1cor10:31
    - 92 LX coupe
    - 96 EX wagon (sold)

    Comment


      Originally posted by pointaudio View Post
      so if I read this right


      I can take the knuckle off a 03 Tl and put this directly on to my 92 cb9 without hassle? which caliper will be needed?



      one of these > http://www.ebay.com/itm/99-03-ACURA-...122543&vxp=mtr



      And what of the rear? is there a direct bolt on or do I find the thread about the rear replacement ?

      thanks I'm still learning and truly appreciate the help
      I haven't did the rear yet but on my 93 CB9 ex I used1 st.gen odyssey knuckles and my calipers . It was plug and play!!!

      "Cleft"
      Rolling vid>> Click Here

      Comment


        Originally posted by ncoutlaw View Post
        I found it easier to just pull the complete knuckles off an 01/02 accordingly v6 direct bolt on. .
        Originally posted by heero357 View Post
        ^^^agreed. i took the knuckles off 03 tl. simple plug n play for the front, nothin else needed from another car.
        i used the 02 TL and was done in the front in an hours
        http://i220.photobucket.com/albums/d...82408002-1.jpg

        Comment


          what are you guys doing for the rear?(disk)

          "Cleft"
          Rolling vid>> Click Here

          Comment


            Originally posted by swk_cb7 View Post
            what are you guys doing for the rear?(disk)
            prelude hubs
            http://i220.photobucket.com/albums/d...82408002-1.jpg

            Comment


              odyssey new hubs are hard to find, anyone have a location?

              I can get the bearings all day but I need hub assembly!

              thanks in advance.
              MadLab Racing
              Southern Maryland


              Comment


                Use 97 Prelude hub assembly (same as 1997-2001 CRV front hubs)
                Honda part number: 44600-S47-000
                Last edited by wildBill83; 12-03-2012, 02:59 PM.

                Comment

                Working...
                X