That's what I'm thinking too. It's the only header that goes from 4 to 2 before the curve at the bottom. Unless you run the Skunk2 alpha that has all 4 cylinders coming down individually.
Announcement
Collapse
No announcement yet.
K24/k20 Cb7
Collapse
X
-
Whew, it's been a while. I'm still not up and running but progress is definitely being made. Making sure everything is just right the first go round so I won't have to keep pulling the motor out after it's done. Here's the current state. Should have first start up done by the end of this week.
Comment
-
Yup they are. As long as you get the right mounts for your engine/trans setup. Innovative mounts are made for the RSX/Civic combo and Hasport for the TSX/Accord combo. That could change in the future though.Last edited by mjsstanley; 11-12-2017, 08:40 PM.
Comment
-
That's awesome! What are the next items on the agenda to get this thing going?My Members' Ride Thread - It's a marathon build, not a sprint. But keep me honest on the update frequency!
Comment
-
Just a few misc wrap up things now. Getting the harness wired up completely, need a new traction bar kit (A/C compressor was touching the old one), get the radiator in place..
All minor stuff at this point. I originally wanted it done by the end of October and since that didn't happen, I'm open it taking as long as it needs to to avoid having to keep pulling it out.
Let's hope by Christmas lol.
Comment
-
Originally posted by mjsstanley View PostFinally got this thing in!
Comment
-
Originally posted by BreckAConner View PostHow's the oil pan clearance to the ground on the K? I heard people say it sits low to the ground.The CB7 Collector.Team Kindred Impulse Member #392 LX Coupe F22A12013 Toyota Corolla S92 EX Sedan F22A1Originally posted by deevergoteDo you really need to make a thread asking if having your car like this /---\ will cause uneven tire wear? Try walking like that for a few weeks and see if your shoes wear funny! (hint: they will.)
Comment
-
Originally posted by mjsstanley View PostNo joke, I looked at the car sitting on the tow truck and the first thing that came to mind was damn that oil pan sits low! And I'm riding stock height on 18s.
There's still decent clearance but you don't have your header to protect you any. The steel oil pan is a MUST.
Comment
Comment