thinking about turboing stock f22

[pr3pg4lyfe]

ok im looking to gather some info ok 1st I have a f22a4 stock with h23 im and intake. second my goals are to have at least 200+whp. lastly my budget is pretty tight right now but once I price everything out ill start saving. so my questions are what is a good cheap reliable turbo kit? would a turbo kit from ebay be good?? also would I have to loose the front mount with any turbo??

[pr3pg4lyfe]

would this one be considered a good starter kit?? http://m.ebay.com/Pages/ViewItemPic....462630&emvcc=0

[vinbon63]

Link didn't work for me. All you gotta do is search man. DSM set-up seems like a perfect starting point for you considering the numbers you want to put down. Budget wise, it should be a good way to go too, just search dsm in the forced induction section to learn everything you need to know, and check this out too:

http://www.cb7tuner.com/vbb/showthread.php?t=17090

[quickangel93]

ill tell you one thing right now, stay the fuck away from ebay. lol with that said

heres a cheap setup. source the parts and build.

DSM 14b Turbo
DSM 1st gen or 2nd gen Manifold
Custom Downpipe
Treadstone performance Honda Prelude Intercooler and Piping Kit
Any Bov U want (I used the HKS SSQ Knockoff off ebay and it worked ok)
DSM Stock Turbo Injectors (their 450cc)
H23 Intake Mani
Chipped P06 Computer (out of a 92-95 civic)
Knockoff or True Slowboy racing Turbo J Pipe with a little tube welded in for a hose to your wastegate
Boost, Oil And Wideband Gauges

And i think thats it. If you source good you could end up spending 1500 + cost of tuning.

I made 243 on a stock f22 with f22 intake mani at 12.5 psi

[pr3pg4lyfe]

I kinda liked the dsm setup but I don't want to loose my front mount or custom fab 1

[LoDollar92LX]

I kinda liked the dsm setup but I don't want to loose my front mount or custom fab 1

what front mount? you are n/a. unless you are talking about those stupid interfooler intakes which in that case yes toss it and put a dsm setup on

[nucleara]

think he meant motor mount, I made a nice one from scrap at work. but I switched to a diff front cross member so i needed to but turbo clearance was planned into the design. and stock mounts (20 year old) without that front mount sucked a lot.

[LoDollar92LX]

think he meant motor mount, I made a nice one from scrap at work. but I switched to a diff front cross member so i needed to but turbo clearance was planned into the design. and stock mounts (20 year old) without that front mount sucked a lot.

durr.

yeah you gotta stiffen the other mounts or make a new front mount or your P/S pump WILL hit the hood and make annoying dents.

[F20A CB7]

Why threadstone prelude ic kit? Do they fit better


Also to the op, how about makin side mounted intercooler, it will b by your battery.

Stealth ftw.

[quaidum]

Why threadstone prelude ic kit? Do they fit better


Also to the op, how about makin side mounted intercooler, it will b by your battery.

Stealth ftw.

i wouldn't recommend putting the intercooler in the engine bay it needs air going through it not hot air soaking into it

trust me i did this and looking back it was real dumb

[F20A CB7]

i wouldn't recommend putting the intercooler in the engine bay it needs air going through it not hot air soaking into it

trust me i did this and looking back it was real dumb

I no wat u mean by heat, but for me I have a predator style hood, that has vents and stuff, unless the op wants to cut and mke a vent.

[Jccck]

http://www.treadstoneperformance.com...0&phot_key=289

Everything you'll ever need in a turbo kit
And only $1800

[rexload]

only $1800 LMAO
you can put a DSM turbo kit together for 500 even with a FMIC

[Jccck]

only $1800 LMAO
you can put a DSM turbo kit together for 500 even with a FMIC

Yeah and the quality is about quarter of what the Treadstone kit is too smartass
Not to mention the potential power output

[Extacee]

now wouldn't a 16g be better than a 14b?
what differences of power are we looking at?