CB7Tuner Forums

Go Back   CB7Tuner Forums > Parts & Performance > Technical

Reply
 
Thread Tools Rate Thread Display Modes
Old 01-10-2014, 01:42 AM   #1
Flushcb
CB7tuner Member
 
Join Date: Dec 2013
Location: SC
Posts: 131
Flushcb is cool... so far.
Question Transaxle Removal

I'm going to be reusing my tranny from the f22, but I'm not sure how to remove it from the engine block. My chilton manual doesn't show how to either, and I don't have the money for a helms, nor could i find anything online so far. I've already removed the axles and intermediate shaft, and that's about it. where are the other bolts located to take it off? Any pictures to help show where they are would greatly be appreciated!
__________________

JDM powered CB7
Flushcb is offline   Reply With Quote
Old 01-10-2014, 01:57 AM   #2
XCRN
CB7tuner Member
 
Join Date: May 2013
Location: On a horse with no name.
Posts: 773
XCRN is cool... so far.
There is a youtube video by Honda How To that is on a Prelude, the only thing I saw was different was some block to transmission L shaped bracket was on the Prelude and not the Accord.
__________________
Be unique, like every other person.

CB7 Sold________________________E34 Sold________________________E39 Current
XCRN is offline   Reply With Quote
Old 01-10-2014, 02:06 AM   #3
92accordkidd
CB7tuner Member
 
Join Date: Jul 2009
Location: bronx,ny/pennsylvania
Posts: 724
92accordkidd is cool... so far.
this video should help u out alot http://www.youtube.com/watch?v=qv-wb-VltZY
__________________
92accordkidd is offline   Reply With Quote
Old 01-10-2014, 02:11 AM   #4
XCRN
CB7tuner Member
 
Join Date: May 2013
Location: On a horse with no name.
Posts: 773
XCRN is cool... so far.
Quote:
Originally Posted by 92accordkidd View Post
this video should help u out alot http://www.youtube.com/watch?v=qv-wb-VltZY
That's it. Remember that is only part 2 of 3, for some reason part one is not in the recommended videos but there is an annotation for part 1 and 3.
__________________
Be unique, like every other person.

CB7 Sold________________________E34 Sold________________________E39 Current
XCRN is offline   Reply With Quote
Old 01-10-2014, 02:11 AM   #5
Flushcb
CB7tuner Member
 
Join Date: Dec 2013
Location: SC
Posts: 131
Flushcb is cool... so far.
Alright, thanks a lot!
__________________

JDM powered CB7
Flushcb is offline   Reply With Quote
Old 01-10-2014, 02:13 AM   #6
92accordkidd
CB7tuner Member
 
Join Date: Jul 2009
Location: bronx,ny/pennsylvania
Posts: 724
92accordkidd is cool... so far.
thats the video but it will be some slight changes the bolt u leave for last is the motor mount bolt and its easier if u drop the front crossmember it will give u some more room
__________________
92accordkidd is offline   Reply With Quote
Old 01-10-2014, 02:24 AM   #7
Flushcb
CB7tuner Member
 
Join Date: Dec 2013
Location: SC
Posts: 131
Flushcb is cool... so far.
The motor is already out, I just needed to pull the tranny from the block so i can put it on the other motor.
__________________

JDM powered CB7
Flushcb is offline   Reply With Quote
Old 01-10-2014, 09:47 AM   #8
illinois_erik
CB7tuner Member
 
Join Date: Jan 2009
Posts: 2,110
illinois_erik is very helpful illinois_erik is very helpful illinois_erik is very helpful
theres a little black plate on the bottom thatll hang you up once you get all the long bolts out. takes about 5 mins to d/c a trans if it and engine are out of the car.
__________________
illinois_erik is offline   Reply With Quote
Old 01-10-2014, 03:15 PM   #9
Flushcb
CB7tuner Member
 
Join Date: Dec 2013
Location: SC
Posts: 131
Flushcb is cool... so far.
I think that's what's stopping me. and a few bolts I've missed. I'm going at it again today.
__________________

JDM powered CB7
Flushcb is offline   Reply With Quote
Old 01-10-2014, 08:30 PM   #10
Flushcb
CB7tuner Member
 
Join Date: Dec 2013
Location: SC
Posts: 131
Flushcb is cool... so far.
Yes! It was the black plate that covers the flywheel, the starter and that one bolt that was covered in grime, but now we put in a new throw out bearing, lubed everything up that should be, and put it on the new motor! gotta clean it up though haha.
__________________

JDM powered CB7
Flushcb is offline   Reply With Quote
Old 01-10-2014, 08:37 PM   #11
XCRN
CB7tuner Member
 
Join Date: May 2013
Location: On a horse with no name.
Posts: 773
XCRN is cool... so far.
I'm curious, why did you pull the engine without the transmission the first time.
__________________
Be unique, like every other person.

CB7 Sold________________________E34 Sold________________________E39 Current
XCRN is offline   Reply With Quote
Old 01-10-2014, 08:46 PM   #12
Flushcb
CB7tuner Member
 
Join Date: Dec 2013
Location: SC
Posts: 131
Flushcb is cool... so far.
I didn't, the transmission was on the engine when I pulled it out. And if you're curious why I did take it out as a whole, it was because I only had under 30 minutes to do anything that day and just went balls to the wall. I had the lever that adjusts the angle of the engine and I pulled it out so the tranny wouldn't hit the mounting bracket.
__________________

JDM powered CB7
Flushcb is offline   Reply With Quote
Reply

Tags
f22 , h22 , removal , transaxle , transmission

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 08:58 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.