*OFFICIAL NW CHAT THREAD Ver.2*

[d112crzy]

Wait, so I shouldnt get a WS2? what should I get?
Sound is semi important...it has to sound good...It can be loud if it has to be I suppose.....And Now Im holding off on the swap so I can grab a few more goodies....I bought a Stage 1 clutch, and I am going to get a custom weighted flywheel....And Im trying to get a Header. I got my H23 Im and a better intake setup....
Is S2k throttle body too much for my motor?
Also grabbing a P06....
And....well some juice lol.

No need for a p06 or an s2k tb with a stock cam. The h23 im/tb could use some tuning I guess tho.

and the ws2 is restrictive if you want to make good power(200+). I'd go to a muffler shop and have them make a 2.5" exhaust for you with your choice of muffler and like 2 resonators. I'd also get either a high flow cat or a test pipe.

[zack_odom]

either a full bisi head, or Im going to make something up lol...
Get a 262 regrind or something similar...

[zack_odom]

No need for a p06 or an s2k tb with a stock cam. The h23 im/tb could use some tuning I guess tho.

and the ws2 is restrictive if you want to make good power(200+). I'd go to a muffler shop and have them make a 2.5" exhaust for you with your choice of muffler and like 2 resonators. I'd also get either a high flow cat or a test pipe.

ok,.....well I am changing the cams lol...

[Father Time]

Get a 262 regrind or something similar...

It's 260 and NO! They are nice and help a little yes, but I wish I went with some thing different.

The are cheap yes, but NOT worth it if you are going to build it further than just I/H/E.

[zack_odom]

What is cheap? Im confused..the exhaust is cheap?
so for motors, Im putting together an F23 with K20 pistons, and
am just trying to figure out the head and intake side of things...

[F22HB]

What is cheap? Im confused..the exhaust is cheap?
so for motors, Im putting together an F23 with K20 pistons, and
am just trying to figure out the head and intake side of things...

He's sayin the cam regrinds are cheap and to pay more to be fully satisfied.

[Father Time]

What is cheap? Im confused..the exhaust is cheap?

Delta 260 Cams. I called them and they are like $90.

He's sayin the cam regrinds are cheap and to pay more to be fully satisfied.

[zack_odom]

He's sayin the cam regrinds are cheap and to pay more to be fully satisfied.

So going the Bisimoto route is a good idea !
good to know...
I was trying to figure out what I can use to build the F23 head.....
I would love about 200whp, and then hit it with just a 75 shot when Im bored.....
got all the 5spd swap stuff for free lol.

[Father Time]

So going the Bisimoto route is a good idea !

Yes and no. What are your plans power wise?

[d112crzy]

lol, wishful thinking Zach.

You're a broke nig nog, you're nog gonna hit 200whp without forged internals. Also..f23 will be high dollar custom crap. No one makes pistons or rods for them. Bisi makes a cam, so he MIGHT have the valve train for it but i doubt it.

Why the f23?

[zack_odom]

about 200whp....
On an F23 VTEC with K20 pistons, header, port,polish/h23 im/Valves,Springs,Retainers/
P06/2.5" exhaust/and whatever else it takes...

[zack_odom]

lol, wishful thinking Zach.

You're a broke nig nog, you're nog gonna hit 200whp without forged internals. Also..f23 will be high dollar custom crap. No one makes pistons or rods for them. Bisi makes a cam, so he MIGHT have the valve train for it but i doubt it.

Why the f23?

Everything is free...I get an F23 block for free...
Also get K20 pistons from free....
And I have help now from a guy with like 40 years of honda experience...
I painted his daughters car so now he said he would help me do a bunch of stuff....

[Father Time]

And how much you willing to spend?

You would almost be better off buying Jose's F22B DOHC. Then you can buy my 260's and throw them in there like you want.

Won't be at 200whp but would be faster than you are now.

[zack_odom]

No DOHC for me....
I want to build a single cam....
We'll see guys......I guess I should just go and do all of these things,
And see where it gets me....Im only going to be spending like 3 grand on the whole build....

[kelton]

So I made it all the way to spokane in a half tank! thats a first lol. But my trip back I almost used the entire tank. Im assuming because there seems to be more going up hill on the way back.