Buy My Stuff!!!

[deevergote]

I read somewhere that the M45 and M62 share a housing, just have different internals. This one is definitely off of a C230 Kompressor.

I have to ship something out tomorrow, so I'll get a shipping quote on it then.

[lbus9168]

Thanks for the fog's, Mike

[deevergote]

They look great!
I guess in Australia, having USDM fogs is probably even more uncommon than US guys running JDM fogs, eh?

[lbus9168]

The only foglights that were offered over here as an option were jdm foglights, and I've only seen three sets them since I've started looking, so in about a year, so yeah, pretty rare.

I think there are two guys I know of with usdm fogs.

[wtfisafleek]

Do you still have the used rubber door molding and balljoints/tie rod ends?

[deevergote]

Indeed I do.

[wtfisafleek]

Which door's molding do you have, and specifically which one? E.g. outer/inner door gasket, belt molding? I need the door gaskets for the driver side.

How much for the ball joints?

[Raf99]

Those prelude shifter cables, straight plug and play with our cars? And what is the condition of them?

Wanted to swap mine out for something better.

[deevergote]

Which door's molding do you have, and specifically which one? E.g. outer/inner door gasket, belt molding? I need the door gaskets for the driver side.

How much for the ball joints?

I believe it's a complete set of 4 door gaskets. I prefer to sell them complete, or else I'll end up throwing half of them away. I'll have to dig them out and inspect them, but they should be complete and in good condition. Ball joints are unused, but aftermarket. How's $25 plus shipping for the lot? Not sure what shipping would be. I could probably squeeze it all into a reasonably sized box, as long as I'm careful not to hurt the gaskets.

[deevergote]

Those prelude shifter cables, straight plug and play with our cars? And what is the condition of them?

Wanted to swap mine out for something better.

I'll look into the shifter cable compatibility. I believe they work, but I'll double check before I say for certain.

[Raf99]

I'll look into the shifter cable compatibility. I believe they work, but I'll double check before I say for certain.

Thanks
Ya, that and there's no point in getting them if they are in the same condition as my 25 year old OEM ones.