Whats up cb7'ers, I have a lazy idea and need to know if this would work. Fist off this is not for a cb, I'm wanting to do a spare tire enclosure. MY idea is this. Seeing this area i'm working with is oblong and has about 2.5 cubic feet and a 2 inch lip flush all the way around the top. Could i get away with dynomating the "tub" section and using 3/4in mdf cut out to top this space off. Using something along the lines of liquid nails to glue and seal the speaker board over the tub area?
I though about glassing the tub to make a mold but that's alot of work, Cost and mess, then having to bond it to the mdf to make one peice. Let me hear your thoughts. Thanks.
I though about glassing the tub to make a mold but that's alot of work, Cost and mess, then having to bond it to the mdf to make one peice. Let me hear your thoughts. Thanks.
Comment