Am attempting to get the 3 bolts off my exhaust pipe that attached to exhaust manifold. I can't seem to reach the center bolt. The crossmember is blocking it. I thought about using a flared(or regular crows foot) crows foot and get it from top. Any suggestions?
Announcement
Collapse
No announcement yet.
How to reach the center bolt on exhaust pipe a?
Collapse
X
-
Originally posted by Rilas View PostI've always just used a 14mm impact socket and 2-3 long straight extensions, never had a problem... Not sure why you can't get it.90 LX 4dr 5 spd 396,014 (sold 1/1/2022) - MRT: http://www.cb7tuner.com/vbb/showthread.php?t=201450
08 Element LX FWD AT 229,000 - MRT: fleetw00d : 2008 Honda Element LX - CB7Tuner Forums
Comment
-
yeah it was easy. I didn't even need a swivel extension. Just was worried and wanted to be prepared for anything as i work on it in an apartment parking. Got everything off, including the gaskets. The right gasket was sort of a pain to pry out. Bolts made a big cracking sound when first cracked loose, which at first i thought the bolt snapped but it didn't. This was alot easier than i expected. I think soaking it in pbj for a week made the difference. Now just got to put gaskets in and button everything down.
Comment
-
Glad it went well. On to the next project!90 LX 4dr 5 spd 396,014 (sold 1/1/2022) - MRT: http://www.cb7tuner.com/vbb/showthread.php?t=201450
08 Element LX FWD AT 229,000 - MRT: fleetw00d : 2008 Honda Element LX - CB7Tuner Forums
Comment
-
Originally posted by F22Chris View PostDo you have a new car yet?
Comment
Comment