CB7Tuner Forums

Go Back   CB7Tuner Forums > Parts & Performance > Technical

Reply
 
Thread Tools Rate Thread Display Modes
Old 09-16-2013, 08:02 PM   #1
wagon-r
CB7tuner Member
 
Join Date: Jun 2013
Location: Ann Arbor, MI
Posts: 441
wagon-r seems to have made some friends! wagon-r seems to have made some friends!
F22A1 and F22A6 camshaft specs

As explained in a post I put up a few minutes ago, I purchased used F22A1 and F22A6 camshafts and degreed them.

I degreed them on the head, not the block, but the results should be the same. I set the valve lash to zero, so all measurements are of actual valve lift, and I measured lift at the top of the valve retainer.

Following are the valve lifts and duration that I measured. All durations are at 0.050" valve lift.
............................F22A1....F22A6
Exhaust lift.............0.350"....0.365"
Intake lift...............0.350"....0.365"
Exhaust open BBC.....30..........36
Exhaust close ATC....-18.........-18
Intake open BTC.......-13........-13
Intake close ABC........23.........29

Calculated
Exhaust duration......192........198
Intake duration........190........196
Exhaust center.........114........117
Intake center...........108........111
Lobe separation........111........114
Advance....................3...........3
Degrees overlap.......-31.........-31

What I find interesting is that Honda chose to extend the duration (6 degrees) by increasing the intake/exhaust lobe separation. Exhaust close and intake opening, and hence valve overlap, are unchanged.

Anyway, I hope someone finds these useful.
wagon-r is offline   Reply With Quote
Old 09-26-2013, 01:49 AM   #2
P5ylance
CB7tuner Member
 
Join Date: Oct 2009
Posts: 1,253
P5ylance is someone to admire P5ylance is someone to admire P5ylance is someone to admire
i love information!

and you have the bisi lvl 2 specs as well right? i'd like to see them side by side
__________________
blackROSE Member, with a focus on VIP Style
P5ylance is offline   Reply With Quote
Old 09-26-2013, 05:42 AM   #3
HappyGilmore
AKA Gillymomo
 
Join Date: Feb 2009
Location: Jacksonville, FL
Posts: 1,507
HappyGilmore is cool... so far.
Send a message via AIM to HappyGilmore Send a message via MSN to HappyGilmore Send a message via Yahoo to HappyGilmore Send a message via Skype™ to HappyGilmore
New sticky coming soon? I think so! I been looking into a cam as well. I would like to know what's out there, I want to get maybe 300 out of my F22A1 someday. Would be kinda nice, even better without boost!
__________________
The CB7 Collector.
Team Kindred Impulse Member #3
92 LX Coupe F22A1
97 LX Wagon 5-Speed F22B2
92 EX Sedan F22A1
Quote:
Originally Posted by deevergote View Post
Do you really need to make a thread asking if having your car like this /---\ will cause uneven tire wear? Try walking like that for a few weeks and see if your shoes wear funny! (hint: they will.)
HappyGilmore is offline   Reply With Quote
Old 09-26-2013, 07:48 AM   #4
deevergote
Don't call me dude.
 
Join Date: Aug 2003
Location: Not New York
Posts: 40,076
deevergote . You'll never be this cool... deevergote . You'll never be this cool... deevergote . You'll never be this cool... deevergote . You'll never be this cool... deevergote . You'll never be this cool... deevergote . You'll never be this cool...
Send a message via AIM to deevergote
Stuck until we can integrate it into the useful info thread. Nice work!
__________________






deevergote is offline   Reply With Quote
Old 09-26-2013, 12:12 PM   #5
mugencivic4dr
CB7tuner Member
 
Join Date: Nov 2012
Location: San Antonio, TeXas
Posts: 692
mugencivic4dr is cool... so far.
i wish i knew what this info meant. cam specs is something that i always wanted to know about but can never find the time to "study" it :/
__________________
FRIENDS
DONT LET
FRIENDS
ROLL ON
ROTA'S
mugencivic4dr is offline   Reply With Quote
Old 09-26-2013, 12:45 PM   #6
jdm92_accorn
CB7tuner Member
 
Join Date: May 2007
Location: back in north carolina
Posts: 1,155
jdm92_accorn is very helpful jdm92_accorn is very helpful
Send a message via Yahoo to jdm92_accorn
Here's the new bisimoto level2 specs
Exhaust lift................. .403"
Intake lift.................... .389"
Exhaust open BBDC..... 41
Exhaust closes ATDC... 1
Intake opens BTDC....... 4
Intake closes ABDC...... 44

Calculated @.050"

Exhaust duration.......... 222
Intake duration............. 228
Exhaust center............. 110
Intake center................ 110
Degrees overlap........... 5
jdm92_accorn is offline   Reply With Quote
Old 09-26-2013, 01:08 PM   #7
Joey GT-R
Super Moderator
 
Join Date: Mar 2006
Location: Tallahassee, FL
Posts: 1,793
Joey GT-R has a HUGE cock! Joey GT-R has a HUGE cock! Joey GT-R has a HUGE cock! Joey GT-R has a HUGE cock!
Send a message via AIM to Joey GT-R Send a message via MSN to Joey GT-R Send a message via Yahoo to Joey GT-R
Quote:
Originally Posted by mugencivic4dr View Post
i wish i knew what this info meant. cam specs is something that i always wanted to know about but can never find the time to "study" it :/
http://www.cb7tuner.com/vbb/showthread.php?t=197390

You've been served....
__________________
'94 JDM H22A: 178whp 146wtq

Quote:
Originally Posted by deevergote
If you say double dutch rudder, i'm banning you...
Joey GT-R is offline   Reply With Quote
Old 09-26-2013, 01:32 PM   #8
bobbycos
Contributing Member
 
Join Date: Aug 2008
Location: bronx ny
Posts: 1,892
bobbycos seems to have made some friends! bobbycos seems to have made some friends!
Send a message via AIM to bobbycos
Quote:
Originally Posted by Joey GT-R View Post
thank you for a good thread
bobbycos is offline   Reply With Quote
Old 09-26-2013, 04:25 PM   #9
wagon-r
CB7tuner Member
 
Join Date: Jun 2013
Location: Ann Arbor, MI
Posts: 441
wagon-r seems to have made some friends! wagon-r seems to have made some friends!
Quote:
Originally Posted by jdm92_accorn View Post
Here's the new bisimoto level2 specs
Exhaust lift................. .403"
Intake lift.................... .389"
Exhaust open BBDC..... 41
Exhaust closes ATDC... 1
Intake opens BTDC....... 4
Intake closes ABDC...... 44

Calculated @.050"

Exhaust duration.......... 222
Intake duration............. 228
Exhaust center............. 110
Intake center................ 110
Degrees overlap........... 5
Nice post. However, I think you mixed up the intake and exhaust lift.
wagon-r is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 10:49 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.