brawl : 1990 Honda Accord LX

[brawl]

Been on this site for a long time and never posted pics so here's the layout of my car.

Picture quality is garbage since all photos were taken with my camera phone...

Link where all pics are: http://www.cardomain.com/id/xbrawl

Mods are as follows:



Engine
1996 H23a1 with H23 Trans

-Head Portmatched and glassbeaded intake & exhaust ports with head decked 0.0010 and 3 angle valve job
-WebCams 620+5 Street regrind cams
- P14 ECU chipped by JET Engineering
- DC Sports Header
- Matrix Motorsports Intake
- 2 1/4" SS Catback system with Arospeed Muffler
- Centerforce St. 2 Clutch w/ machined flywheel
- AEM Power Steering Pulley
- MSD Blaster 2 Coil
- Venom Fuel Pump
- DSM 450 CC Injectors
- Koyo OEM radiator
- 160 T-Stat

Suspension
- lowered 3" with Suspension Tech. extreme drop springs
- Ractive Front & Rear strut tower braces
- Brembo drilled rotors w/ axxis pads
- 17" Exel Ennios wrapped in 205/40/17 Kuhmo Ecsta 711's

Exterior
- VIS Vader Carbon fiber Hood
- Blackhousing front and side turn signals
- Red/Clear tails

I.C.E.
- Autometer A/F Gauge
- Sunpro 3" Tach
- Tan Leather door panels
- Kenwood CD Player
- 6 1/2" Kenwood Excelon door speakers
- Digital Audio tweeters in door panels
- 1200 watt Kenwood Excelon monoblock amp
- 12" Eclipse sub in sealed enclosure

[PRIMOCB7]

props on the built H23 and clean lookin' ride

[drunknballer]

sweet ride man

[H23 Lude]

looks nice man

[oneoffaccord]

torquey h23 how much where the cams? clean ride but it dont look like a 3in drop

check out my ride...................h23cb7

[brawl]

Cams were 330 from Webcams. She rips out of the hole faster than most any other import i've raced yet. It doesn't look like it but it is, at least according to Suspension Techniques. I dont care, the back wheel almost tucks and i have very little to no wheel gap in the front. Thanks for the props guys.

[MRX]

much props...any times on this beast?

Also how do u like ur radiator and t-stat? I need something to keep mine cooler and the 160 t-stat by itself isn't working as well as i'd like.

[brawl]

I only ran 15.4 @ 92.2 before the entire fuel system, cams, headwork, header, catback piping, and JET ECU. I'm pretty sure i'm in the 14's now, but I just need to get new tires for my prelude rims to run at the track again. The radiator and T-Stat made a world of difference. I took my OEM out and found that they only good fins still left on the radiator actually made the shape of the cooling fan. quite funny. The only thing is that during winter, i will be all the way to work (5 mile drive with a 5 min warmup period) and the car has not even reached full operating temp. But I have a jacket.

[kamaccord]

Very nice car!

[williamsvt]

nice car bro, love the buiilt h23..very nice!

[JailBa8]

Looks really good. Yeah the back looks tucked but we all know accord tend to be higher on the front

[Laguna7]

Nice, Like the motor!

[g-wagon]

sweet.... i got a h23 head waiting to go on a f22 block.... would you recomend those cams?

[brawl]

Definitely recommend WebCams for anything...smooth idle with great mid to high end pull...easiest way to describe it is I feels similar to VTEC kicking in at high rpm's.

[busychild0]

nice motor man... did you go down to the o.c. car show? i lived in o.c. for 5 years. go down every now and then to visit parents. do you ever come down? i know its quite a drive. we may know some of the same people. nice ride man would like to see this thing run.