\\\\\\\\\\\\\\\\\1979 Lincoln Continental Towncar
exterior
-New Vinyl Halftop
-New "opera" windows
-semi-new black paint (they did a shit job)
-Replaced all the bad trim and chrome with used pieces
interior
-New Headliner
-New Highbeam toggle switch with Auto-dimmer deleted
-stripped trunk (more room for the corpses)
audio
-cheap walmart cd player
-missing rear speakers
engine
-2bbl 400m 6.6 v8
-c6 3 speed auto
-thermactor pulley removed and system isolated
-Repaired cruise control "coffee can" vacuum inlet (cc now functions lol)
-Complete head and carb rebuild prior to purchase
-Passenger side exhaust manifold from a 76 torino w 351c
(picture of engine right after purchase above, newer pic below)
future plans
-RV cam
-Australian 351 3valve Heads
-Edelbrock Intake manifold
-Strengthened Valvetrain
-we'll see, Im concentrating on my CB for now. =)
So a couple months ago I drove 12 hours round trip to pick up my new toy. I've wanted a "clunker" for awhile, and I just couldn't pass up the deal that I got this classic road barge for. This clown didnt realize he was missing a stud on the passenger side manifold and assumed the engine was bad, as well as thought the wipers didnt work (they were unplugged) so I slapped a replacement on from a torino with new gaskets asap, now she glides through the powerband effortlessly like silk. (and thats pulling 4500+lbs)
here she is on the way home stopping to feed the pig.
right after I got her home my dad was almost ready to fight me trying to buy her off me.
exterior
-New Vinyl Halftop
-New "opera" windows
-semi-new black paint (they did a shit job)
-Replaced all the bad trim and chrome with used pieces
interior
-New Headliner
-New Highbeam toggle switch with Auto-dimmer deleted
-stripped trunk (more room for the corpses)
audio
-cheap walmart cd player
-missing rear speakers
engine
-2bbl 400m 6.6 v8
-c6 3 speed auto
-thermactor pulley removed and system isolated
-Repaired cruise control "coffee can" vacuum inlet (cc now functions lol)
-Complete head and carb rebuild prior to purchase
-Passenger side exhaust manifold from a 76 torino w 351c
(picture of engine right after purchase above, newer pic below)
future plans
-RV cam
-Australian 351 3valve Heads
-Edelbrock Intake manifold
-Strengthened Valvetrain
-we'll see, Im concentrating on my CB for now. =)
So a couple months ago I drove 12 hours round trip to pick up my new toy. I've wanted a "clunker" for awhile, and I just couldn't pass up the deal that I got this classic road barge for. This clown didnt realize he was missing a stud on the passenger side manifold and assumed the engine was bad, as well as thought the wipers didnt work (they were unplugged) so I slapped a replacement on from a torino with new gaskets asap, now she glides through the powerband effortlessly like silk. (and thats pulling 4500+lbs)
here she is on the way home stopping to feed the pig.
right after I got her home my dad was almost ready to fight me trying to buy her off me.
Comment