Socal Whats new with your RIDE?

[cb9tuner]

Test fitted the Blitz wheels..

wheels look good craig just need to be alittle lower fill the wheel gap in

new for my car is my fogs work now when it started to rain I found my windshield leaks in two places due to the leak water trickled down the back of my dash on to my fog relay and filled in with water this is what happens when water meets a relay when its powered
,

[JDMxDB8]

Slam the CB7 Craig!

[ikayto]

wheels look good craig just need to be alittle lower fill the wheel gap in

new for my car is my fogs work now when it started to rain I found my windshield leaks in two places due to the leak water trickled down the back of my dash on to my fog relay and filled in with water this is what happens when water meets a relay when its powered
,

way to diagnose the problem
Question though, shouldnt your fog relay be tucked beneath the dash near the fuse box? I just cant see how water got in lol.

[bmxicansd]

wheels look good craig just need to be alittle lower fill the wheel gap in

haha.. I would but just sold my f2's.

Slam the CB7 Craig!

Plan on getting a new suspension sometime soon, but wont roll slammed just because i'd rather not dent up my SMSP header.. lol..

[cb9tuner]

haha.. I would but just sold my f2's.



Plan on getting a new suspension sometime soon, but wont roll slammed just because i'd rather not dent up my SMSP header.. lol..

smsp dang dont want to ruin that peice of art

[GHOST 2.2]

craig go omni powers or megans!

[bmxicansd]

craig go omni powers or megans!

let me ride in your car fool..

[StickyDilJoe]

I like it, going to do it in red once I make Ginger a little more aggressive with some key parts.

You're gonna bring back the blank red windshield banners?

[ikayto]

lol i figure why not, it's reversible so it's not like i'm dooming myself to it. I'm trying to find a Honda Clio banner though, just so it has some real meaning but if not a red banner will do. At least the banner will shade me in the sun.

However, finding the clio banner is hard, i'm starting to think they only made Primo and Verno windshield banners.

for people that have no idea what i'm talking about, Honda Japan sold different models at different key dealerships and there are windshield banners that display the words Honda and the dealership like Primo.

Honda Primo, Honda Verno and Honda Clio. Civic is sold at Honda Primo and Integra, S2000, & NSX are sold at Honda Verno. Honda Clio deals with Accord & Legend.

[cb9tuner]

I just fixed my fogs, and on the way to pick up my little sisters from school my car started to bog nasty, and the cel came on, I checked it cel 1 o2 sensor, I think its bad but the exhust is to hot right now to check power, signal and resistance to at the o2 sensor, dame got to love these old cars, I just wish I had a beater to fix my car and not worry about driving it tomarrow

[ikayto]

mpg takes a dump when your 02 is messing up, it'll cost you money at the pump if you let it run that way.

When my 02 sensor was giving me code 1 and code 42? I went from 21mpg to 17mpg. Was costing 11 dollars more everytime i pumped gas because if my 02 was running properly i'd still have 11 dollars of gas in my tank, so about 15 gas trips and you could have had a new 02 sensor lol.

[GHOST 2.2]

let me ride in your car fool..

sure sometime in the summer when im back in daygo.

the steering response on the bb6 reacts much quicker then the cb. and my settings are just on street. 12 front 24 rear and no signs of body roll in contrast of having a stiffer setting on my omnis and not bad for having bald tires as well. gotta get some new rubber soon.

[cb9tuner]

yea I know, but I whent and checked my 02 sensor out and found it was covered in oil ?? I know my rear main is leaking but how would it reach the connector, but I cleaned the connector reset the ecu and test drove no cel for the o2 sensor, but Im still bucking and bogging but I think its fuel pump related, the motor wont let me hold it at a steady rpm above idle I dont have a hold of my test light or fuel gadge since its at work, but anyone have any insight ??

[blackcb7]

Check your igniter and ignition related components.

as for your o2 sensor being covered in oil, most likely you have a valve cover gasket leak causing it to drip on the connector

[cb9tuner]

Check your igniter and ignition related components.

as for your o2 sensor being covered in oil, most likely you have a valve cover gasket leak causing it to drip on the connector

beginner question how do I check the igniter? cap rotor plugs new wires I should of repalced but seem ok, and my valve cover cap where you add oil the o-ring was leaking but my valve cover isnt leaking