Socal Whats new with your RIDE?

[4CYLPOWER92]

and stop at the honda stealer ship to get the tps gasket and was for sale unless you buy the hole throttle body with new sensor. got ps oil

Yep, you have to get the tps from the junk yard, or use the one from your
F22 cause they are the same. Also, I'm pretty sure Hmotors guarantees all sensors to be not broken. So they should send one if you call them.

[ikayto]

got my jumper harness from password jdm.

got some royal purple for the tranny, K&N oil filter,tap and die set, ecu pins from the junk yard free 90 free, spark plugs

welded my ps pump (cross my finger) painted my bumper flat black it was arcadia green and stop at the honda stealer ship to get the tps gasket and was for sale unless you buy the hole throttle body with new sensor. got ps oil

just waint for my driver side axle from oriely's. going to finish it this weekend so its ready when I drive back to cali at the beginning of august.

doing work!

[hondamanf22]

Yep, you have to get the tps from the junk yard, or use the one from your
F22 cause they are the same. Also, I'm pretty sure Hmotors guarantees all sensors to be not broken. So they should send one if you call them.

everything was good from hmotorsoilne, I'm guessing that when they where in the process of cleaning that they had already moved my tps and the gasket failed but the tps is perfect so I got some self adhering gasket sheet from napa to make my own for it. so i'll be good.

doing work!

hell ya bro. going to finish this thing. parts store gave me the wrong belt for the a/c and alt. told him 6x to make sure it had 5 ribs on the blet not 6so when i put it over the a/c it would not go on another set back, wait for tomorrow for a fresh start. got to weld on my down pipe 2

[bmxicansd]

got my jumper harness from password jdm.

got some royal purple for the tranny, K&N oil filter,tap and die set, ecu pins from the junk yard free 90 free, spark plugs

welded my ps pump (cross my finger) painted my bumper flat black it was arcadia green and stop at the honda stealer ship to get the tps gasket and was for sale unless you buy the hole throttle body with new sensor. got ps oil

just waint for my driver side axle from oriely's. going to finish it this weekend so its ready when I drive back to cali at the beginning of august.

Good to hear you're almost done Gabe..

New to my beater is a passenger side axle, and Clarence Brown camber correction procedure. If you live in SD give them a try.

[J'SR@C3R1_818]

I havent had an alignment since I've been driving my car. It pulls to the right a little so I know I need one but I guess I just dont want to the spend money. I also have a exhaust leak and I asked the muffler guy about it but he said its not even that bad. I was going to fix it but he said that if I put aftermarket flanges on it they are going to warp after time and its just going to happen again.

[Blk EX Coupe]

Good to hear you're almost done Gabe..

New to my beater is a passenger side axle, and Clarence Brown camber correction procedure. If you live in SD give them a try.

A good old fashioned hand alignment always feels better most of the time. There is a shop local to me called Andersons that does it the same way, but they require appointments and it cost $90+

I need to get my car aligned too, but my polyurethane bushings are making noise, so I have to pull everything and grease it up first.

[timmy0tool]

nice update craig! how much was it?

and hondaman, you can just make a TPS gasket yourself using gasket paper, pencil, and scissors. simple and cheap!

[Darkcloud]

Well I got started on mounting my manual seat belts.









Just have to fix this gap


My autobelts kept getting stuck and the dealer started to charge me after the 3rd visit anyway I'm re-doing the whole interior.

For the record, yes I know people have it's dangerous but I'am taking the extra precaution's in welding the the areas that are thin.

[ikayto]

It may be just me but I think auto belts do nothing even with a lap belt. Your torso will still move freely with the autobelts as it doesnt lock, and that's either your face into the steering wheel or your dash.

[Blk EX Coupe]

It may be just me but I think auto belts do nothing even with a lap belt. Your torso will still move freely with the autobelts as it doesnt lock, and that's either your face into the steering wheel or your dash.

My friend told me from personal experience that face to the steering wheel hurts...a lot.

[Darkcloud]

It may be just me but I think auto belts do nothing even with a lap belt. Your torso will still move freely with the autobelts as it doesnt lock, and that's either your face into the steering wheel or your dash.

It stayed as if the door was open and never moved. When the dealer fixed it (supposedly) 2 weeks later it would do it again.

My friend told me from personal experience that face to the steering wheel hurts...a lot.

It still could happen even if I had auto belts. One this is for sure the manual belts lock up faster. To me anyway

[Falcon]

Before I got the radio I would put my iphone in the coin tray slot and listen to music until open the window then all I hear is air. So I got mad at seeing a gaping hole in the center console so I sold my old motorcycle leathers for $200 and got this for $60.



Then filled up the tank and got me some Tommy's

[hondamanf22]

I got my car off the jack stands. But I go to turn it over and it dosent start. I have spark but it wont turn on.

[4CYLPOWER92]

Sounds like time for troubleshooting. But right after a swap it takes several tries before the fuel pressure builds up. Mine didn't start till the 5th time or so.

[hondamanf22]

Sounds like time for troubleshooting. But right after a swap it takes several tries before the fuel pressure builds up. Mine didn't start till the 5th time or so.

I've tried a bunch time over I hope its the fuel pressure needing to build up or else im going to pull my hair and die of a heart attack.