Announcement

Collapse
No announcement yet.

Socal Whats new with your RIDE?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    nice chan! how's your daughter?

    Comment


      10,000 miles on the h in less than a year

      Comment


        19 gallons of gas and paint is chipping off my rear bumper.

        Comment


          relocated my 2 channel amp
          installed my 4 channel amp (new)

          it wasnt hard, the bitch part was just running and hiding the wires.

          installation was successful!

          Comment


            Put my original cat converter back on, and noticed an exhaust leak between the pos carsound cat and the B pipe or whatever it is. I might not pass smog with the OG cat, but I want to see the numbers with it anyways.

            Cleaned out the EGR valve....it had built up a nice layer of carbon since it was last cleaned 2 years ago. Waiting for it to dry before I reinstall it.

            My swap thread
            Main relay proplems?--DIY

            Comment


              kane, I can lend mine's to you.....
              The beginning of a new era............................
              165 hp 149 ft. lb. torque sohc non vtec. then....
              184 whp and 149 ft. lb. torque f20b stock now......

              Comment


                I'm gonna stay with oem for now. If need be I'll probably buy a new one. I don't think aftermarket cats are any good for more than 2 years.

                My swap thread
                Main relay proplems?--DIY

                Comment


                  got two semi-new dunlop front tires. in my old front, one of the stupid falken 912s inner bead BROKE and had three massive bubbles on the sidewall. pretty crazy, and i was just replacing the tires b/c of a nail.

                  no wonder i was loosing air even after i patched the hole. the inner tire sidewall was cracked! POS falken 912s, never again!
                  1cor10:31
                  - 92 LX coupe
                  - 96 EX wagon (sold)

                  Comment


                    Originally posted by 4CYLPOWER92 View Post
                    I'm gonna stay with oem for now. If need be I'll probably buy a new one. I don't think aftermarket cats are any good for more than 2 years.
                    I'm just saying if u don't pass smog with your old one. I don't use it. It's only for smog purposes.
                    The beginning of a new era............................
                    165 hp 149 ft. lb. torque sohc non vtec. then....
                    184 whp and 149 ft. lb. torque f20b stock now......

                    Comment


                      Originally posted by timmy0tool View Post
                      got two semi-new dunlop front tires. in my old front, one of the stupid falken 912s inner bead BROKE and had three massive bubbles on the sidewall. pretty crazy, and i was just replacing the tires b/c of a nail.

                      no wonder i was loosing air even after i patched the hole. the inner tire sidewall was cracked! POS falken 912s, never again!
                      Reminds me I need to get an allignment done soon. I have bad camber wear on my tires right now, which is odd cause the front camber was set at zero last time, and the rear is negative but within spec. Toe is off I'm sure.

                      Originally posted by jhondayaaj View Post
                      I'm just saying if u don't pass smog with your old one. I don't use it. It's only for smog purposes.
                      Thanks Joesue, if it comes to that I may take you up on the offer.

                      My swap thread
                      Main relay proplems?--DIY

                      Comment


                        So i just changed My Flex plate like a month ago, and now my reverse F*cks up.
                        A friend of mine help me get a MP6A (H23) auto tranny, what can you guys
                        tell me about the MP6A tranny?
                        Cappuccino CB7 Member #4
                        FoDough fo moreho
                        [FuNKiE FrEsH]

                        Comment


                          they all work the same. if u don't want it, u can give it to me. LOL.
                          The beginning of a new era............................
                          165 hp 149 ft. lb. torque sohc non vtec. then....
                          184 whp and 149 ft. lb. torque f20b stock now......

                          Comment


                            Originally posted by 4CYLPOWER92 View Post
                            Reminds me I need to get an allignment done soon. I have bad camber wear on my tires right now, which is odd cause the front camber was set at zero last time, and the rear is negative but within spec. Toe is off I'm sure.



                            Thanks Joesue, if it comes to that I may take you up on the offer.
                            anytime kane.
                            btw, how's the weather up there?? LOL.
                            The beginning of a new era............................
                            165 hp 149 ft. lb. torque sohc non vtec. then....
                            184 whp and 149 ft. lb. torque f20b stock now......

                            Comment


                              Originally posted by jhondayaaj View Post
                              anytime kane.
                              btw, how's the weather up there?? LOL.
                              lol

                              did you sell those rims yet?
                              My Honda

                              Comment


                                Originally posted by crusto2k3 View Post
                                lol

                                did you sell those rims yet?
                                pm'ed.
                                The beginning of a new era............................
                                165 hp 149 ft. lb. torque sohc non vtec. then....
                                184 whp and 149 ft. lb. torque f20b stock now......

                                Comment

                                Working...
                                X