Socal Whats new with your RIDE?

[ikayto]

niceee you got them on with the parking lights! so was it a standard switch with live and gruond or did you go relay?

[Nurega]

niceee you got them on with the parking lights! so was it a standard switch with live and gruond or did you go relay?

I ended up not using a switch. I was going to use a defroster switch, but for some reason, the fogs wouldn't stay on. I'd have to push the defroster switch button and hold it down for the lights to stay on. After some aggravation, I gave up on the switch.
I used the ashtray light ground/live to supply power. So now, the fogs just come on when the parking lights are switched on.

[iwork4mycb7]

that was the passenger 90-91 lol, it's my spare.

aight thanks anyways.. are u heading to the meet tonight?

[90accords]

I ended up not using a switch. I was going to use a defroster switch, but for some reason, the fogs wouldn't stay on. I'd have to push the defroster switch button and hold it down for the lights to stay on. After some aggravation, I gave up on the switch.
I used the ashtray light ground/live to supply power. So now, the fogs just come on when the parking lights are switched on.

use a hazard switch if you wanna go that route

[blaxemj]

Hey guys, just wanted to ask if anyone has an spc balljoint press tool that i would be able to borrow, or if anyone would be able to help me install them on my CB. I gone to the point of no return and the ball joint press i borrowed from autozone isn't doing it. Any help or advice. thanks.

[jhondayaaj]

bad rod knock. barely made it home. time for a new motor. f20b here I cum. I mean come. I think the rod knock came from over revving my motor. I think I took it to 7500 a few times.

so if anyone is interested in the headers and cams, lmk. i'll give you guys a so cal discount. I paid 1300 for this and am selling for under 1000. paid about 450 for cam and gear and gonna sell for way cheaper. lmk. thanks.

[Nurega]

Got my P12 ECU going. I'm loving every second of it...it genuinely feels stronger under the 3500RPM range. City driving is hugely improved; the engine seems easier to rev-match smoothly, probably due to the sharpened throttle response.

It does have the unfortunate effect of putting me in hooligan mode in the city, but I'm not complaining!

[bmxicansd]

thanks! yes i did wilson..

looks good Noel

bad rod knock. barely made it home. time for a new motor. f20b here I cum. I mean come. I think the rod knock came from over revving my motor. I think I took it to 7500 a few times.

so if anyone is interested in the headers and cams, lmk. i'll give you guys a so cal discount. I paid 1300 for this and am selling for under 1000. paid about 450 for cam and gear and gonna sell for way cheaper. lmk. thanks.

sweet...

[ikayto]

hmmm interesting joesue.

[jhondayaaj]

hmmm interesting joesue.

Buy it Wilson. I'll give u a discount u never gave me. Lol.

[cb9tuner]

Buy it Wilson. I'll give u a discount u never gave me. Lol.

lol!!!! now you have to buy it wilson!

[casterX]

looks good Noel

thanks craig! though still far from finishing.. had a few drips and runs, but nothing a good wet sand can take care of.. i hope..

[b3nsonx]

claybared my car for the first time, paint feels so much nicer and looks better
but am i supposed to use up the whole clay and lubricant spray in 1 session?
cause i used up 3/4 of the bottle and also the clay is really small now.

[Nurega]

use a hazard switch if you wanna go that route

thanks for the good idea. I actually did go and get a junkyard hazard switch today, and I'll be wiring it up tomorrow.

[ikayto]

claybared my car for the first time, paint feels so much nicer and looks better
but am i supposed to use up the whole clay and lubricant spray in 1 session?
cause i used up 3/4 of the bottle and also the clay is really small now.

depends on the roughness of your paint. My girlfriend's civic had paint like sand paper and it chewed up the clay bar on the hood alone o.o.

I just used some turtle wax rubbing compound to take off some of that roughness

thanks for the good idea. I actually did go and get a junkyard hazard switch today, and I'll be wiring it up tomorrow.

Then paint over the hazzard symbol and draw the fog light symbol :]