Canadian Red Stripes

[CaSpAr4Rm916]

I just want to know how to do the Red stripes on the bumper like this:



&

NOTE: I don't want to hear/read 'Paint, Sticky or Glue', I want to know how to put them on the correct way onto the bumper rails.

[otto07]

few options.

paint them on, get chrome trim molding and paint it red then stick it on, use red electrical tape, etc...

[JoshM]

First time I've ever heard the pin stripes referred to as "Canadian".

Either paint it or go to AutoZone, Advance Auto, etc, and get red pin striping. It'll be in the same aisle as the chrome butterfly stickers, chrome accents, and all that other ugly and tacky stuff.

[xkjnboix]

First time I've ever heard the pin stripes referred to as "Canadian".

ditto

[AAPOQ]

Canadian red stripe sounds like a new type of beer to me...

[AAPOQ]

NOTE: I don't want to hear/read 'Paint, Sticky or Glue', I want to know how to put them on the correct way onto the bumper rails.

At this point, applying the line on the trim is trial and error. Nobody can teach you something the way you're asking.

That would be like me asking you how to wipe a butt...

[JoshM]

At this point, applying the line on the trim is trial and error. Nobody can teach you something the way you're asking.

x2.

On "real" bumpers/trim pieces that have the red line there's actually an indention that it's placed into.

The CB never had the option. The only way to do it is DIY. Just take your time... one little bump in your straight line will stick out like Megan Fox's thumb.

[drew12000]

Canadian red stripe sounds like a new type of beer to me...

Urban dictionary says different

Using the red tape is the easiest and most forgiving way to achievethe look.

[AAPOQ]

Urban dictionary says different

Dear Lord, why did I google canadian red stripe LAWLZZ...
That's freakin funny...

[DjM_coupe]

if you dont want them "painted" on only way to do it would be to buy JDM front and rear bumpers and side moldings...then remove the chrome and paint it red, reinstall and enjoy...good luck with that and spending close to $1000 for the body pieces as opposed to using paint or a vinyl pinstripe costing about $2

[i want my cb9]

i wanted to do this in the past but changed my mind, i found on ebay very thin red self adhesive trim molding that comes in different thickness and length. not that exspensive and probably better then the tape. check it out.

[DjM_coupe]

I have the vinyl pinstripe and its ok