92 ex rear mount insert?

[axmarque]

I have a bad rear mount that needs to be replaced can I use dx/lx rear mount with the bracket from the trans from a dx/lx? I also have a rear insert that's only good on dx/lx models only

[cb7rush]

the EX bracket is different than the LX/DX..if you want to use something made for the LX/DX model, youre going to have to switch the bracket to the LX/DX bracket in order fo it to fit.

[Granite CB7]

You are headed in a good direction, hyraulic mounts are terrible. As stated above, you will need a CB DX/LX 5spd rear mount and rear mount "LOW" bracket. A 92/96 Lude 5spd bracket will work too.

[axmarque]

thanks for the help I'm going to head to the junkyard and pick up a dx/lx bracket.

[quaidum]

You are headed in a good direction, hyraulic mounts are terrible. As stated above, you will need a CB DX/LX 5spd rear mount and rear mount "LOW" bracket. A 92/96 Lude 5spd bracket will work too.

the hydraulic mounts are only on auto's he never mentioned anything about it being automatic

the trim has nothing to do with it being hydraulic

[Granite CB7]

^All CB EX manuals came w/ tall style oil filled rear mounts, w/o vacuum control. CB's came w/ 3 possible rear mounts, all auto, ex 5spd, and dx/lx manual. DX/LX is the only true rubber rear mount. Trim does make a diff. in this case though.

[quaidum]

/\ really? because i had a rear 93 ex mount that was broken and it didn't look like there was a cavity for oil to be in

but now looking at the picture for the mounts from majestic the ex MT and AT look identical beside the vacuum control