Facts about the wagon...

[Shadow1]

yeah you would need the bracket


and roh is worth it in the long run trust me

well i would but thats $300 i dont have. not wanting to spend that much on that just yet. just need some new rotors and i figured why not just upgrade.

[i-07]

well i would but thats $300 i dont have. not wanting to spend that much on that just yet. just need some new rotors and i figured why not just upgrade.

are u doin it or a shop?

[Accrdwgnguy]

You use the Prelude VTEC rotors if doing ROH

[i-07]

You use the Prelude VTEC rotors if doing ROH

why?

[C91BLX7]

Wagons don't have a trunk release lever! just a gas door lever.

[i-07]

Wagons don't have a trunk release lever! just a gas door lever.

true

[Tnwagn]

why?

The size of the rotor vs. that of the regular CB

[Night Wolf]

I want to know, did the Canadian wagon have a higher top speed on the cluster, vs the 220 kph on the sedan/coupe cluster.

my american wagon cluster only goes upto 220KPH while in MPH it goes upto 140. now that I have a canadian KPH cluster in my wagon its still the same 220KPH

11.1 in

yup, theres also many honds that share the same size in both ROH & HOR.

nice. thanx man. i plan on doing this swap later on. rotors and calipers. would i need the bracket for it also?

yup but those can come off any 11" rotor set up.

[Shadow1]

yup but those can come off any 11" rotor set up.

ok. so i get the '91-93 wagon rotors, the calipers and could i get the brackets from auto zone or do i have to get them off a wagon?

[cb7dazz]

i would just get the calipers and brackets off a wagon in the junkyard

if not then you would have to buy loaded calipers from the auto store which include calipers, brackets, and pads

cheapest way would be jy

[Shadow1]

i would just get the calipers and brackets off a wagon in the junkyard

if not then you would have to buy loaded calipers from the auto store which include calipers, brackets, and pads

cheapest way would be jy

dag man. its gonna be hard for me to find a junk yard with wagons. all the wagons ive seen down here are driven by old folks and they keep those to lug around their crap. lol.

[Night Wolf]

then find a legend

[tear2wo]

can the shocks that hold the hatch open be taken off another car? ie civic hatch?

[JesterMasque]

can the shocks that hold the hatch open be taken off another car? ie civic hatch?

I second this question. Mine are totally shot.

Also, I found another difference that wasn't listed anywhere:
When attempting to remove my corners every post I found on here said you just remove the screw on the top and they just pop out. Upon further inspection I found that there is another phillips head screw that spreads open a clip that you have to loosen.

When I get a chance I'll post a pic, but there are no other posts that I found on here that explained this at all. So now I have to go on eBay and buy some new corner lenses because mine are pretty much just sitting in place (my friend and I broke off the top brackets in attempts to pry them out).

Can I get any model of CB corners to fit my wagon?

[djcaz_aom]

Sorry to butt in, but the above posts are completely off topic. Start a new thread and keep to the topic in the future.