OK, I thought there was a thread on here somewhere, but I have not been able to find it with the search function. Anyway, I am trying to find the instructions for removing the trim area around the radio and HVAC controls and to get to the gauges. I am needing to do this to replace some burnt out bulbs behind the gauges and the HVAC controls.
I thought it had something to do with removing the center vents to get at some screws there, removing the ones on the side. Does the console area around the shifter need to come out, too? But what else is there. And can I just try tilting the gauge cluster forward to get the bulbs or just go ahead and pull it out?
Any review of how to do it or a link to a previous thread for doing this would be appreciated.
Thanks.
I thought it had something to do with removing the center vents to get at some screws there, removing the ones on the side. Does the console area around the shifter need to come out, too? But what else is there. And can I just try tilting the gauge cluster forward to get the bulbs or just go ahead and pull it out?
Any review of how to do it or a link to a previous thread for doing this would be appreciated.
Thanks.