duck spoiler (the JDM rear deck spoiler)

[TÜNE.FREE]

i know that it is impossible to find these spoilers but will this one work, it is for a 240sx, well a s13.. anyways, it looks to be the right size...

shit, cant post the link, it is on ENJUKU RACING.com, it is the second page of the 240sx parts. here is a pic.

[cp[mike]]

i dont think anybody here will be able to tell you yes or no unless you buy it and try it. or at least do lots of measurements and comparisons between your trunk lid and the trunk lid of the car you plan on getting one from... make sure the width is the same, the curves of the trunk, etc etc etc...

instead of asking on here, i think YOU should be telling US if it fits or not

[TÜNE.FREE]

well my buddy has a s13, ill take measurements tommorrow and come back with results...

[clarksterdotcom]

$280?!?! plus shipping?! GADDAYM.. sorry man.. id only fork out that much for a true flushmount.. plus its CF.. so bending it and just securely mounting it might meant that you will have some stripped holes in your trunk....

[cb9tunerguy]

you can get a m3 style rear lip spioler off of ebay for about $15.00
it look similar to a honda flushmount.. by the way has anyone ever tried a flush mount off of an 03-04 accord??

[97Lude]

you can get a m3 style rear lip spioler off of ebay for about $15.00
it look similar to a honda flushmount.. by the way has anyone ever tried a flush mount off of an 03-04 accord??

doesn't look simliar to a honda flushmount at all. Its a thin peice of plastic that you can barely see.
Hmm the new accord seems to have a rounded trunk, i dont think it would fit

[b-townCB7]

i've seen some older preludes around my town with oem flush mount spoilers. but i don't know how similar they would be.

[97Lude]

i've seen some older preludes around my town with oem flush mount spoilers. but i don't know how similar they would be.

i think its been tried and did not work

[snailin91]

dont care what you think, but they were on to somtin on OVER HAULIN when they cut the top and back section off an old trunk. and welded it onto the exhisting trunk lid. very clean and smooth. thinks i will attempt this winter. but i wanna make the cut section out of a CF trunk lid. and graft it on.

[Weezo182]

what about the flush mount from a 94 accord?

[AccordWarrior]

what about the flush mount from a 94 accord?

The 94-95 tail is way too narrow compared to the CB tail. Definitely wouldn't work.

[gloryaccordy]

dont care what you think, but they were on to somtin on OVER HAULIN when they cut the top and back section off an old trunk. and welded it onto the exhisting trunk lid. very clean and smooth. thinks i will attempt this winter. but i wanna make the cut section out of a CF trunk lid. and graft it on.

I saw that too and did the JDM 'HooooOOOO!!!' amazement exclamation...but if you're gonna do it with CF you might as well just get some CF and make your own spoiler...way cheaper, way better, plus I don't think you can bend CF once it's dried and molded anyway.

[T3h HoT!!]

^^^^^hey u could do that?? were do they sell carbon fiber at? i might try this, or atleast try and get one made.

[tommi]

i saw a 80's style maxima the square ones sportin lip flushmounts would thos work?? they look like they would fit not sure tho.

[Kurobei]

i saw a 80's style maxima the square ones sportin lip flushmounts would thos work?? they look like they would fit not sure tho.

Nope those don't fit either. I was bored and tried all the lips I coud find at my local junkyard. I tried a 80's Mitsu Galant lip spoiler (contours weren't right), 84 3 Series (Seems like it was almost meant to be...but a little too long on both sides and the contours weren't really flush to the trunk) and I tried a '87 Maxima Lip. As far as contours go, this one actually does sit flush against our decks but it's about 2 1/4 inches too long. If you were handy u can actually cut this wing in half and take a section out and put it back together and have a nice flushmount....