Plastic headlight restoration tips?

[Raf99]

Thicker clear won't necessarily solve the problem. You're looking for the best bond and seal. Something else to note about using the 2k clear is that you must wear a respirator and proper clothing when using it in a well ventilated area. It's always recommended to use a face mask, but 2k clear is on a different level compared to regular consumer grade spray paints.

Even the new clear will oxidize again, but it'll last longer than any other method.

This kit: https://www.amazon.com/3M-39008-Head.../dp/B001AIZ5HY is the best value. It includes most of the stuff you'll need to restore the headlights and those 3m trizact disc are expensive.

thanks, i'll order that.

[Fleetw00d]

I just used Meguar's medium kit on our Pilot and TSX headlights. The Pilot lights weren't as bad as the TSX. The kit includes a polishing compound, polishing pads, and spray coating. For the TSX, I used a 1500 grit wet sand first before the kit's polishing compound.

20191020_114953 by Paul Kemme, on Flickr

20191020_124254 by Paul Kemme, on Flickr

20191020_114907 by Paul Kemme, on Flickr