thanks for the support man..I'm am focusing on school stuff now while the pistons and rings get check on...I have all the stuff but the ring terminals to do my battery relocation...but I want to make sure I have the car working before I even thing about moving the battery..just want to have the engine first before the wire tuck and battery relocation---help reduce on another added issue
Announcement
Collapse
Please DO NOT Post In The General Section
From this point on until otherwise briefed, posting in the general section of Performance Tech is prohibited. The only thing to remain here will be the stickies. We would just delete this section, but that would cause unintended results.
The majority of the threads created can appropriately be placed in one of the Performance Tech sub-forums or Technical; and the posting of them here is detrimental to the activity of said forums. If you have any questions about where you need to place your thread PM me or one of the other mods.
For the most part you all have caught on without this post, but there have been a few habitual offenders that forced me to say this.
Everyone will get a couple of warnings from here on out, after that I just start deleting threads.
Again if you have any questions, PM me or one of the other mods.
The majority of the threads created can appropriately be placed in one of the Performance Tech sub-forums or Technical; and the posting of them here is detrimental to the activity of said forums. If you have any questions about where you need to place your thread PM me or one of the other mods.
For the most part you all have caught on without this post, but there have been a few habitual offenders that forced me to say this.
Everyone will get a couple of warnings from here on out, after that I just start deleting threads.
Again if you have any questions, PM me or one of the other mods.
See more
See less
G22 turbo build
Collapse
X
-
New paint job and bumper 8/8/11
tsx retrofit
f22b dohc boosted
custom gauges pods
Motivation is one of the keys to life....tell me "can't" and I wll show you I can
-
alright I got the word back from wiseco...ALLL my rings are shot...so they got me a set for half price....I figure out my bore information
I need to be at 85mm or 3.346 inches I"m at 84.8mm right now, which is not badly off...I have to just take my time an rehone the cylinder walls right
I don't think hone the walls good..I didn't use a fine stone to finish the job...way to go me..I'm going to get it right this timeNew paint job and bumper 8/8/11
tsx retrofit
f22b dohc boosted
custom gauges pods
Motivation is one of the keys to life....tell me "can't" and I wll show you I can
Comment
-
I just did that to see what I have loosely...I am going to remeasure everything tomorrow to exact specs in inches when i got my pistons in tomorrowNew paint job and bumper 8/8/11
tsx retrofit
f22b dohc boosted
custom gauges pods
Motivation is one of the keys to life....tell me "can't" and I wll show you I can
Comment
-
alright I got my pistons back from wiseco...yayaya....they sent me the wrong new rings 84mm instead of 85mm....booooo...I sent it back....well all of my rings are gone....because of cylinder contamination aka honing plateau was way to rough..I got it fixed now....just waiting for rings now to finish upNew paint job and bumper 8/8/11
tsx retrofit
f22b dohc boosted
custom gauges pods
Motivation is one of the keys to life....tell me "can't" and I wll show you I can
Comment
-
Well I decided to do a wire tuck and paint while I have the room to do it..before i put the head back onNew paint job and bumper 8/8/11
tsx retrofit
f22b dohc boosted
custom gauges pods
Motivation is one of the keys to life....tell me "can't" and I wll show you I can
Comment
-
nawww...it's down for piston ring replacement at the momentNew paint job and bumper 8/8/11
tsx retrofit
f22b dohc boosted
custom gauges pods
Motivation is one of the keys to life....tell me "can't" and I wll show you I can
Comment
-
All is well...thank god for dial bore gauges...well I got it running without a single smoke trail except for the previous oil disaster burn off...well I got it running but between 1-2 grand rpm it revs good with gradual accelrations but if i rev it fast is is sluggish that until is passes that point....I put it in first and drive off and it is still sluggish 1-2 grand and then gets real happen after thatNew paint job and bumper 8/8/11
tsx retrofit
f22b dohc boosted
custom gauges pods
Motivation is one of the keys to life....tell me "can't" and I wll show you I can
Comment
-
Wire tuck and engine bay paint completeNew paint job and bumper 8/8/11
tsx retrofit
f22b dohc boosted
custom gauges pods
Motivation is one of the keys to life....tell me "can't" and I wll show you I can
Comment
-
I should have pics of the monster soon...I'm doing some tuning with freelog and crome on vaccum first then gradual boostNew paint job and bumper 8/8/11
tsx retrofit
f22b dohc boosted
custom gauges pods
Motivation is one of the keys to life....tell me "can't" and I wll show you I can
Comment
-
Hey...I pull the plugs and notice they were black and at the top of each piston was wet...any ideasNew paint job and bumper 8/8/11
tsx retrofit
f22b dohc boosted
custom gauges pods
Motivation is one of the keys to life....tell me "can't" and I wll show you I can
Comment
Comment