My first boost build, suggestions?

[Jack93prj]

F22a6 IM lower runners
Gutted IAB spacer
H23 Upper plenum and TB
Bisi Heatshield IM Gasket
I have a volvo t3 AR 50.

I haven't picked a turbo manifold and was wondering if anyone had any suggestions. I am not going high horsepower yet just 8-10 psi untill I have the money to completely build the trans

Oil Pan tapped for return
DSM black top 450cc injectors
manual boost controller

p06 with Hondata s100

Oil Catch Can
Debating Wire Tuck, Most Likely i will!
2.5" Downpipe to full 2.5 exhaust -no muffler for now-
Boost - Temp - Pressure Gauges, will be where my radio use to be. NO worries I still have music, but I wanted to hide my gauges so only I can see them.. This is the start to my build any suggestions

[NWaccord]

Seems like you have a solid plan with decent parts for a first turbo build. If your not planning to raise the boost up past 13psi or so....I would recommend a turbo log manifold. They make good power at lower boost levels and give you some nice room for the downpipe, wastegate dumps, it can also prevent you from running a half size radiator.

[Joey GT-R]

I believe SpeedFactory came out with a nice looking F22A Manifold. Give it a shot on google.