Summer Turbo Project

[Fr0z3N]

Damn man that blows, I hope its not that serious

[92ex]

you don't get outta vacuum in idle. you probably are running rich at idle, i am, and UD is very fickle about me changing idle a/fs, your spark plugs sound fouled, check intake mani for leaks, and the coolant lines into the turbo

[bresk8r87]

oops, i meant i wasnt getting out of vaccum at partial throttle...id get the same sputter at around 2500, and the highest i went was 4000 and it flatlined at 0 in/hg...so no boost entering the intake mani... ill recheck to see if i by chance blew a pipe in the morning before work, but as for the plugs, theyre brand new, bosch platinums, gapped them to about .30.... yeah i know i really should get NGK one step colder, ill work on it

im messing with the map right now in UD trying to lean it up just a little around idle so it wont be as high/rough... we'll see if it makes a difference in the morning.

the missing seems to coincide with the spoolup...as soon as i hear the turbo starting to really spool, it sputters and jumps all over....

ive also got a small t3 map for the f22 i havent tried yet, from the guys at intec racing...ill see if that seems to solve my problems in the morning.

thanks for the help man

[bresk8r87]

seems i was having some map problems... got a decent map to burn finally, leaned it up just a tiny bit near idle, and richened it a little higher in the power band, and the car runs ok for now...its still hard to tell open downpipe, but i was able to rev it to about 4500 alright and held 6psi after i found my leaks (forgot to put a t-bolt back on a connnector....) anyways, car is idleing ~1500 cold still, but thats ok...im gonna work on getting it a little smoother when i get home from work.

[mullet]

Just a little suggestion from my experience, use the plugs you have until you get your tune pretty close to where it needs to be. The NGK V-power plugs will only fuel foul once and are no longer usable, can't be cleaned, won't fire, etc. I went through MANY sets before someone told me you can only fuel foul them once before they're worthless.

[bresk8r87]

yeah, the platinums i bought were only 12 bucks for a set as opposed to iridiums being about 40 bucks, so im not gonna go beserk if i have to drop money on a set of fresh colder plugs when i finish getting things tuned....

BREAKTHROUGH!

I just took it around the neighborhood to see how it would behave at different speeds and if anything changed... it still is pretty rough till you get out of first...i guess i really have to work on the low end map, but once it hits about 3k.... hoooly crap it decided it was time to boogie....it pulled like a mother, no real bad missing noticeable, and no signs of predetonation...so thats good. once i replace my plugs it should run even better....

as for now, im soldering in the datalogging stuff just to get a rough estimate of where im at A/F wise so i dont grenade the block... im definately getting a wideband as soon as its feesable... and im not going to push the car till then.... im gonna do my best to stay out of boost, even though ive got a 2 hour highway drive ahead of me

[bresk8r87]

as of late, car is running like shit again... heres a video i took... notice the erratic idle as soon as i let off the gas going in reverse.... im stumped. anyone have a diagnosis.....pleeeease someone.... sorry about the quality, it was taken on my phone and its more so for the sound than the picture...

http://s53.photobucket.com/albums/g4...t=HPIM0569.flv

[bresk8r87]

video rehosted and fixed

[bresk8r87]

bought a wideband o2 today.... http://cgi.ebay.com/ebaymotors/ws/eB...m=330019543193

slapped the stock injectors and ECU back in today, im driving the car back down to tampa N/A to be safe.... i figure itll take me 10 minutes to put them back in once im settled in down there and have time to tune.... and its better than a blown engine

once the wideband comes in ill really get to tuning...till then, everythings still attached, but the car is stock... i still get looks from people when i start spooling though...how ironic

[mullet]

Am I reading this right? You're running it boosted on stock injectors and ECU?

[Accord R33]

Am I reading this right?

No

[bresk8r87]

update

spent the last few days hunting down and fixing a major oil leak, as well as relocating the oil return to clear the downpipe for peace of mind...

spent a good amount of time on the phone with carlos (wikked) yesterday trying to get the car somewhat tuned (i dont know if you can even call it 'tuning' with a stock o2 sensor and carlos on the phone, but hey, you gotta start somewhere )

anyways, things are looking up, ive got the car running pretty damn good right now on a richened up version of mrx's map, no more hiccups or dying... finally getting the hang of uberdata and maps.... and it looks like it'll be safe to drive it back down to tampa this week for school ::whew::

my wideband is in the mail, and hopefully itll get here tomorrow, if so, im gonna try and meet up with carlos some time this week on my way to tampa and fine tune. currently holding 6psi though....damn couplers keep blowing

[GunRunner]

today was the first time I had seen this thread, seems like you've had quite a summer of boosting your accord. Glad to see that you haven't given up and I hope that you find it all worth while.

[bresk8r87]

wideband came in today! now the fun begins... ill install it tonight once i get my car back from meineke, and im meeting up with carlos in the morning to tune on my way down to tampa.... things are looking up!

EDIT:

Just drove the car back from the shop, sounds great, unfortunately, i have a bad oil leak again, but it looks to just be the oil feed where it meets the turbo, which is easily accessible... fucking stealthmode fittings... im gonna go get the right thread fitting, elbow it off, and seal the shit out of it in the morning....im so fucking sick of leaking oil...i seriously had about 1 quart still in the sump when i got home, i was so scared i was gonna blow the engine... as soon as i pulled onto my street, smoke was pouring out the hood from oil on the exhaust pipe.... NOT GOOD at all.... if anyone knows the for sure thread size of the fitting, let me know, im not sure if its 10x1.25 or a 7/16 thread...either way, guess ill find out manana

[starchland]

nice. what wideband did you pick up?