Announcement

Collapse

Please DO NOT Post In The General Section

From this point on until otherwise briefed, posting in the general section of Performance Tech is prohibited. The only thing to remain here will be the stickies. We would just delete this section, but that would cause unintended results.


The majority of the threads created can appropriately be placed in one of the Performance Tech sub-forums or Technical; and the posting of them here is detrimental to the activity of said forums. If you have any questions about where you need to place your thread PM me or one of the other mods.


For the most part you all have caught on without this post, but there have been a few habitual offenders that forced me to say this.


Everyone will get a couple of warnings from here on out, after that I just start deleting threads.

Again if you have any questions, PM me or one of the other mods.
See more
See less

master power turbo's?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    master power turbo's?

    anyone know of Master Power turbo's? Are they any good, or are they garbage. I was looking into this kit to buy

    http://cgi.ebay.com/ebaymotors/Drag-...06117276QQrdZ1

    SOLD!!
    Boosted H22
    375whp 298 ft/lbs at 15psi
    MEMBERS RIDE THREAD<<<CLICK FOR VIDS AND COOL PICS
    Tags: None
    #2
    i hear thouse darg turbo kits fit almost perfect and last a long time too.
    i don't think i would use the fmu, just get a chipped ecu.
    it doesn't come with injectors either that sux.

    you could put a way better one together for that $2,800
    plus u gotta build the motor to handle that 26 psi.
    stock H can handle 7-9 psi for a long time on a good tune
    FS: DSM turbo parts,OEM parts, and more.....
    My Members Ride Thread - R.i.P

    Comment

      #3
      Well I wouldn't be runnig 26psi, and if you know a cheaper way then let me know, I've done some research and I've come to the conclusion that a good turbo setup isen't much cheaper than what they are asking. I was more concerned about the quality of the turbo's, but I think I'm going to run a custom setup.

      SOLD!!
      Boosted H22
      375whp 298 ft/lbs at 15psi
      MEMBERS RIDE THREAD<<<CLICK FOR VIDS AND COOL PICS

      Comment

        #4
        From what i've heard Master power makes good turbos...
        12.5 at 114.6mph 15psi
        11.7 and 11.5 20.5psi
        F22a1
        60-1 td06h turbo
        Darton mid sleeves
        85.5 wiseco 8.8:1 forged pistons
        Crower pro billet rods
        Custom ported head.
        KMS valves
        F23 headgasket
        ARP H23 headstuds
        H23 upper intake manifold
        F22a6 lower intake manifold
        Intake manifold is gutted
        AEM EMS 1040u
        FIC 850cc injectors
        Walbro 255 pump
        H23 manual trans
        Prelude shifter assembly
        Forbidden short throw
        Nitrous Express Kit installed, never used on this motor

        Comment

        Previous template Next
        Working...
        X