Announcement

Collapse
No announcement yet.

biggest drop on a cb

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    Originally posted by JaK FRoSTWhiTE View Post
    Thats still going by ground clearance.
    So if two cars have a 2.5" drop, one with 15's and the other with 14's, the one with the 14's is going to be considered lower?
    yea but have you tried tucking a 50 series sidewall on a 15" rim? jdmkid didnt even tuck his.

    I <3 G60.

    0.5mm Oversized Stainless valves and bronze guides available. Pm me please.

    Comment


      #32
      if you want to see the lowest accords, go on streetsource.com, they lay body, not bodykits. later.
      Avoiding dirt at all costs

      Comment


        #33
        Originally posted by ikayto View Post
        I would agree if the tire size was consistent on both set ups. Look at it this way, a hummer with 24" probably has no tire gap but not all considered low. Drop the hummer within 5" of the ground and it's dumped. I would use the ground clearance as a proper measurement. There are a lot of variables with tire gap and it's an unreliable kind of measurement.
        Ground clearance is unreliable too.
        Thats like saying that a car with smaller wheels will always be lower.
        Like saying the car with a 2" drop on 15's is lower than the car with a 2" drop on 16's.


        Comment


          #34
          Originally posted by JaK FRoSTWhiTE View Post
          Ground clearance is unreliable too.
          Thats like saying that a car with smaller wheels will always be lower.
          Like saying the car with a 2" drop on 15's is lower than the car with a 2" drop on 16's.
          this is true because i have 3 sets of rims an tires so depending on what rim/tires i put on my tire gap, an ground clearance will change....
          I sell slightly used tires for cheap, jus pm me what u need!

          Hp sells cars, Tq wins races ....
          - 95 Camaro (beast) TOTALED
          - 92 Camaro RS (fixer-upper) SOLD
          -92 Accord LX (slammed) SOLD
          - 95 Jetta (VR-SEX) CURRENT DD

          Comment


            #35
            screw the tire gap and screw the rim size i say low as in actual frame closer to the ground
            lisa is long gone, but sophie is here!

            i got a good feeling about this one

            im going to have to
            __________________________
            |.......................................|||
            |...OVERNIGHT PART'S 4RM....||'|";,__
            |..............JAPAN.................|| ---**-)
            |_..._...____________======||_|_|__--]
            "(@)'(@)''''''''''''''''''''''''*|(@)(@)*****" (@)
            check out my mr thread
            http://www.cb7tuner.com/vbb/showthread.php?t=106541

            Comment


              #36
              Originally posted by JaK FRoSTWhiTE View Post
              Ground clearance is unreliable too.
              Thats like saying that a car with smaller wheels will always be lower.
              Like saying the car with a 2" drop on 15's is lower than the car with a 2" drop on 16's.
              lol how is ground clearance unreliable, if you're low to the ground you're low to the ground. Rim diameter is unreliable, not ground clearance.

              Comment


                #37
                Originally posted by ikayto View Post
                Rim diameter is unreliable, not ground clearance.
                Lets say we have the same springs with the same drop.
                I have 16's and you have 14's, whos going to be lower?
                People with smaller wheels generally are going to be lower if thats the case.

                Somebody should come up with a calculator lol
                The same way they did the Speedo calculator for when u change wheels and tires.


                Comment


                  #38
                  i tuck 205/50/15s....

                  "Tucking tires and wires."
                  The Chronicles.

                  Comment


                    #39
                    It should be from the top of the wheel hole on the fender to the center of the wheel




                    ALWAYS make sure your shock fork is installed PROPERLY


                    Originally posted by lordoja
                    im with you on that one bro! aint nothing beat free food and drinks any day of the week, even if its at a funeral

                    Comment


                      #40
                      Originally posted by JaK FRoSTWhiTE View Post
                      Lets say we have the same springs with the same drop.
                      I have 16's and you have 14's, whos going to be lower?
                      People with smaller wheels generally are going to be lower if thats the case.

                      Somebody should come up with a calculator lol
                      The same way they did the Speedo calculator for when u change wheels and tires.
                      not based on tire aspect ratio.... if u have a smaller sidewall tire and a larger diameter rim it evens out.....

                      "Tucking tires and wires."
                      The Chronicles.

                      Comment


                        #41
                        i have a feeling this is gonna go on forever.... lol
                        Project M3 - http://www.cb7tuner.com/vbb/showthread.php?t=157903
                        -(B-Pillar Bar Originator)-

                        Comment


                          #42


                          haha that was on ebay coils when i first got the car, i got tired of that really quick...they were only on for a week, i drove the car maybe 50 miles. pretty stupid.

                          im pissin on the game feel like i got a weak blatter

                          Comment


                            #43
                            how do you open the back door

                            Comment


                              #44
                              Originally posted by TypeG View Post
                              if you want to see the lowest accords, go on streetsource.com, they lay body, not bodykits. later.
                              X2
                              South Texas M_thaf_cka, that's where I stay!

                              Check out my Frost White CB
                              http://www.cb7tuner.com/vbb/showthre...ight=SpdJnky93

                              Comment


                                #45
                                Originally posted by amavis08 View Post
                                how do you open the back door
                                wtf?
                                Project M3 - http://www.cb7tuner.com/vbb/showthread.php?t=157903
                                -(B-Pillar Bar Originator)-

                                Comment

                                Working...
                                X