Announcement

Collapse
No announcement yet.

Bigger Brake Booster swap

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Bigger Brake Booster swap

    I was wonder what brake booster is bigger and will fit an 9091 ex w/o abs
    NEW CB



    old Darkcloud : 1990 Accord EX MRT

    new
    DARKCLOUD : 90 ACCORD EX MRT

    #2
    Basically, the 90-93 Accords that have rear drum brakes have a smaller brake booster and smaller brake master cylinder. Larger is had for both parts on the vehicle with 4-wheel disc/ABS.

    So look for a 91 or 93 Accord SE, 92-93 EX or 93 10th anniv. LX
    HondaFan81 For Sale Parts (LOW PRICES ON EVERYTHING)

    Comment


      #3
      Is there a way that I can plug up the master cylinder abs ports, or what about a 91 wagon or di those come with abs also I really want to do this.
      NEW CB



      old Darkcloud : 1990 Accord EX MRT

      new
      DARKCLOUD : 90 ACCORD EX MRT

      Comment


        #4
        IIRC the Prelude VTEC has a 1 inch MC and the EX/SE accords are 15/16ths. That'll prob. help a bit in clamping force.

        member's ride thread
        93' EX Coupe H22A w/ P2T4 Sir 5spd 191whp 155 wtq
        99' Lexus LS400 157k VVTi V8 gets up & goes...new DD
        91 Accord SE 176k
        97' Honda Odyssey 199k miles...$485 spare van for my parents

        Comment


          #5
          Does it have abs?
          NEW CB



          old Darkcloud : 1990 Accord EX MRT

          new
          DARKCLOUD : 90 ACCORD EX MRT

          Comment


            #6
            Originally posted by Darkcloud View Post
            Does it have abs?
            yeah the prelude VTECs came w/ ABS

            member's ride thread
            93' EX Coupe H22A w/ P2T4 Sir 5spd 191whp 155 wtq
            99' Lexus LS400 157k VVTi V8 gets up & goes...new DD
            91 Accord SE 176k
            97' Honda Odyssey 199k miles...$485 spare van for my parents

            Comment


              #7
              How can I plug the abs ports since I don't have abs.
              NEW CB



              old Darkcloud : 1990 Accord EX MRT

              new
              DARKCLOUD : 90 ACCORD EX MRT

              Comment


                #8
                Originally posted by Darkcloud View Post
                How can I plug the abs ports since I don't have abs.

                Comment


                  #9
                  Originally posted by mj213 View Post
                  lulz.


                  smoke tires, not drugs.

                  Comment


                    #10
                    Originally posted by mj213 View Post
                    Yeah funny, I'm being serious though and need this info asap before Sat.

                    So if you don't have info don't post please thank you
                    NEW CB



                    old Darkcloud : 1990 Accord EX MRT

                    new
                    DARKCLOUD : 90 ACCORD EX MRT

                    Comment


                      #11
                      i could always bolt + jb weld it

                      and u gotta admit the buttplug was quite funny

                      oh also a side note. all 4g preludes WITH ABS have a 1" brake master cyl.
                      you can further research on preludepower.com
                      Last edited by xkjnboix; 10-22-2009, 07:41 AM.
                      frostwhite225@gmail.com =VENMO


                      http://www.youtube.com/watch?v=NOB38zJu66o

                      [COLOR="Magenta"]

                      Comment


                        #12
                        W/ either the VTEC m/c or the EX/SE m/c, you wouldn't be plugging anything at all, those still have 2 outlets, only difference is the rear flare fitting is larger, M12 compared to M10, like the front flare fitting. What you need to do is pull off the line that goes to the rear fitting on the m/c and flare on the M12 ABS fitting, all the ABS Honda's use them @ the m/c. If you're not up for that, I could def. make one up for you, I've done this afew times now for my ABS removal and H22Wagon93 and I sold an ABS removal package not too long ago w/ this modded line. If you have the fitting and you can flare, you can do this very easily Please LMK if you need me to clarify anything.

                        Oh, also, now is a great time to swap to a 4040 prop. valve if you haven't already!
                        Last edited by Granite CB7; 10-22-2009, 05:58 PM.

                        Comment

                        Working...
                        X