K so i bought my car with a bad vss (the mechincal part not sensor) replaced that with a junkyard went about 3000 miles and then the sensor on that one went out.. put another sensor on it went abour 400 miles then it just stoped working.. pulled it out tested both with a drill and it tested fine... i had another from a junkyard i also put in and tested with a drill and it also tested fine.. so i was like ... ok... put it back in drove down the street i was like yay it worked! then i did a u turn and it went out again :|... pulled it out tests fine... but doesent work inside the car lol
so the problem:
Works with drill
doesent work installed..
anyone know what could be wrong? im thinking maybe its bad wire (there really soaked in oil) or something like that and when i test it with the drill its pulling up on the wire so its getting a better contection?
has anyone ever had this happen before?
so the problem:
Works with drill
doesent work installed..
anyone know what could be wrong? im thinking maybe its bad wire (there really soaked in oil) or something like that and when i test it with the drill its pulling up on the wire so its getting a better contection?
has anyone ever had this happen before?