does anyone know where or have the information for our engine to put into the dyno dektop 2000 program?? anyone?
Announcement
Collapse
No announcement yet.
Dyno Desktop 2000 honda accord f22a*
Collapse
X
-
bore: stroke: intake valve size: exhaust v.s. : induction flow: (cfm)
manifold type: (dual plain singal plain...) lifter: (hydr. flat- tappet lifters, solid flat- tappet lifters, or roller solid or hydr. lifters) intake lift: exhuast lift:
lobe center: valve overlap: intake duration: exhaust dura.: ivo (btdc): icv (abdc): evc(atdc): evo(bbdc):
all of that or whatever you can get....
Comment
-
[QUOTE=busychild0]bore: stroke: intake valve size: exhaust v.s. : induction flow: (cfm)
manifold type: (dual plain singal plain...) lifter: (hydr. flat- tappet lifters, solid flat- tappet lifters, or roller solid or hydr. lifters) intake lift: exhuast lift:
lobe center: valve overlap: intake duration: exhaust dura.: ivo (btdc): icv (abdc): evc(atdc): evo(bbdc):=QUOTE]
my haynes manual says this :
Bore:3.35 inches
Stoke:3.74 inches
valve length: 1990=intake:4.405-4.417 Exhaust:4.856-4.868
1991&92: intake:4.376-4.388 Exhaust:4.809-4.821
93:intake: 4.365-4.377 exhaust: 4.809-4.821
That is all that i can find on this sorry i couldnt help out any more but hope this will get you further then yoiu are now.
Comment
Comment