as you may have noticed in my previous threads I changed the torn up CV boots and practically all suspension parts fromt tie-rods to ball joints.
I installed a new rear engine mount 4 month ago and cured the other 3 that were partially torn with the DIY but using RTV tubes ( I emptied one tube in each of the 3 mounts and they look sturdy)
hoping that would solve the problem I am still having, tranny clunking:
1 - from P to R
2 - from N to R
3 - from N to P passing by R
any help most appreciated, should I remove front/right/left mounts again (PITA ^__^ ) and check them again for cracks ?! or the problem is somewhere else ?!
I installed a new rear engine mount 4 month ago and cured the other 3 that were partially torn with the DIY but using RTV tubes ( I emptied one tube in each of the 3 mounts and they look sturdy)
hoping that would solve the problem I am still having, tranny clunking:
1 - from P to R
2 - from N to R
3 - from N to P passing by R
any help most appreciated, should I remove front/right/left mounts again (PITA ^__^ ) and check them again for cracks ?! or the problem is somewhere else ?!