Does the luk flywheel already have center bushing in it?

[zedjr10]

I just put on a new luk flywheel. Do those things already have center bushing in them. I see one in the clutch kit and am wondering now if i got to pull off flywheel and put that bushing in there. I t looks like one is already there but it looks brass. Anyone know.
Also another question. What else do i grease beside the spline shaft out of tranny. In the service manual it shows greasing those center springs on the clutch disc. Do i grease that with same grease or something else?

[SSMAccord]

The brass bushing should be in the flywheel already.

[zedjr10]

The brass bushing should be in the flywheel already.

i would think so too. Just wanted to make sure.

[Raf99]

Some flywheels don't come with any inserts. Some kits come with them but you don't use it. some as SSM mentioned come with it in already. Confusing topic.
Besides the spline, a little on the inside of the release bearing before putting on (the smooth inside that touches the spline). Also the fork ball pivot point and part of fork that touches that. Don't use a ton as it will fling around the inside of the trans when you start the car (some people think to put a lot / a lot). Cheers.