EXT: A Complete USDM Black Housing DIY W/ PICS!!! (56K Be Warned!!!)

[djcaz_aom]

Like the old Heinz commercial: "Good things come to those who wait."

Laters.

[pt6a12f22a]

ok well i did my headlights last night and they came out good. But the only problem is that the tape i used left some of thats stick stuff on there. How can i get that off??

[Gecko1]

with the tape it self use the sticky side and tap it on and off it comes mine did the same

[djcaz_aom]

I use Goo Gone with a cotton swab.

Laters.

[pt6a12f22a]

I used asiton or whatever its called and it worked amazing

[pt6a12f22a]

i cant find that stained yellow krylon paint anywhere

[djcaz_aom]

i cant find that stained yellow krylon paint anywhere

I posted a link on one page to the Tayima website. They sell the paint as Krylon discontinued the stained glass lineup.

Laters.

[Gecko1]

i tried to take of my headlight but was wondering if you have to remove the black bumper that is under the bumper ?

[djcaz_aom]

i tried to take of my headlight but was wondering if you have to remove the black bumper that is under the bumper ?

You should be taking of both the support(the part you refer to) and the cover. They come off as one piece.

Lates

[Gecko1]

so that long black hard bumper looking thing comes off how ? is thier like botls hiden somewhere

[djcaz_aom]

Read steps 5-8 again. I even posted pics.

Later.

[dannycb7]

Thanks for this post!!!!! is going to help me to make my car look better!!!!

[Gecko1]

okay thanks for the help guy i bought some extra headlights to do this for $10 so i said it was a good deal and this is wat i got let me know wat you think

stuff i bought to do it


front view


top view


did this but took it off thought it looked weird


and i also did my did markers
but i add a little flavor to the all black look...lmk wat you think

black and chrome (okay)


black and yellow reflectors (the best )

[Gecko1]

i have a ? i did the swap but the screws on step 13 got stripped do you guys have any suggestions of how i can take it off the head light is out and those 2 screws are the last ones....please help me out guy

[djcaz_aom]

If you can get a dremel in there, then "convert them into flat head screws.

Soak the rear part of them with WD-4 or what I like best, PB- Blaster!!!

If you can't get a dremel in there, then use a screw extractor to get them out.

Laters.