INT: 92-96 Prelude seats into 9293 CB7 Coupe

[lowcb7]

Op is there a reason i cant see your pics. I have the same seats and would like to see the brackets and how u went about it. More of a visual learner lol

[wildBill83]

Lap seat belts are only 90-91, this is in a 92-93.

[bravedude]

do the lap seat belt work? mine like a whole bunch of peoples dont work

[crazymikey]

They sure did! They look alright too. Not as good as the darker colour though. But they match the tan spot on.

lucid's set

WTF, were these dyed or bleached or something?

So weird seeing a set in tan, but do they ever look good in there!

[91cblx]

Do you have any working pictures? I'm trying to install these seats in my car today

[Hostile]

If there is significant interest in it, I could work something out with a powdercoater and make it happen. PM me.

How much?

[Granite CB7]

^Nice, they did have tan cloth too, looks really good

[Mealsy]

They sure did! They look alright too. Not as good as the darker colour though. But they match the tan spot on.

lucid's set

[Granite CB7]

Nice work Zach^Fabric, not sure, I'm thinking no, but I do know that the 95 SE came w/ tan leather interior, I forget which ext. color though. 95 SE's came in red and silver, that may be it.

[93SM4_CB7]

did they ever make the prelude seats in the same color as the tan interior as that found in the cb

[scudweiser]

you can easily get at it with an open end of a box wrench and tighten it from the front with a socket, i guess if you wanted you could tack weld the nut to the back

[slick]

the head of the bolt on the left is in a large recessed area, its the drivers side outer front mount

ok i see now. was it hard to get it in there? and any pics of it?

[scudweiser]

how did you bolt the prelude seat to the piece of steel you made since you didnt drill into the cb shell? can you explain? i cannot see how this would work on the front mount(b) without interference of the foot well on the cb since the mount you made is sandwiched in between the seat and the foot well



EDIT: im not trying to be an ass just asking cuz i want to know for future reference

dont worry about it slick, now that i think of it, unless you check out the part where the bracket goes you cant see where it very well in the picture

The bolt on the right (in the picture) bolts right into the stock location, the head of the bolt on the left is in a large recessed area, its the drivers side outer front mount if you want to check it out for comparison.

pic so you dont have to scroll back up:


hope that helps

[slick]

how did you bolt the prelude seat to the piece of steel you made since you didnt drill into the cb shell? can you explain? i cannot see how this would work on the front mount(b) without interference of the foot well on the cb since the mount you made is sandwiched in between the seat and the foot well



EDIT: im not trying to be an ass just asking cuz i want to know for future reference

[motobmx105]

can someone make this a sticky

i need to find me some seats now!!!