Announcement

Collapse
No announcement yet.

SUSP: All Camber Kit info

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    Originally posted by cb9wagon View Post
    i'm curious how much physical movement do the adjustable ball joint produce?
    they claim to be 1 degree adjustable.
    There are two different ranges

    1) -1.5* to +1.5* of camber adjustment
    http://www.spcalignment.com/PROD_DIR...d2=67145&cmd3=

    2) +1.5* to +3.0* of camber adjustment
    http://www.spcalignment.com/PROD_DIR...67340(8)&cmd3=


    Originally posted by Maple50175
    Oh here we go again. Maples other half.

    Comment


      #32
      that is part of the info, i need to know the physical movement that the camber device used moves the component that achieves the 1.5 degrees .

      if someone had installed theirs recently i was looking for a rough measurement of the movement the adj. (balljoint or bushing) provides. from my current info it seems to lengthen the upper arm about 1/2inch per 1 degree of camber

      this info can be used to calculate the lower arm position
      Last edited by cb9wagon; 12-02-2009, 04:30 PM.
      96 Accord SiR driveline installed. CF2 donar

      Comment


        #33
        Originally posted by Tnwagn View Post
        There are two different ranges

        1) -1.5* to +1.5* of camber adjustment
        http://www.spcalignment.com/PROD_DIR...d2=67145&cmd3=

        2) +1.5* to +3.0* of camber adjustment
        http://www.spcalignment.com/PROD_DIR...67340(8)&cmd3=
        I'm trying to click on the #2 spc kit but it wont work... Is it just me or is it not working at all?

        "There are only two types of people in this world... Those who run & win, and those who sit at the sidelines & watch the winners pass them by."

        My YouTube Channel! - There's more videos here!
        Check 'em out, hit LIKE, or even better, stay updated with more vids when you SUBSCRIBE, including vids of my JDM H23A swap!

        Comment


          #34
          Originally posted by Accord1320 View Post
          I'm trying to click on the #2 spc kit but it wont work... Is it just me or is it not working at all?
          Well that link is more than 6 years old. SPC's website sucks on mobile, so I can't get you the updated links, but Google can.

          Click for my Member's Ride Thread
          Originally posted by Stephen Fry
          'It's now very common to hear people say, "I'm rather offended by that", as if that gives them certain rights. It's no more than a whine. It has no meaning, it has no purpose, it has no reason to be respected as a phrase. "I'm offended by that." Well, so fucking what?' —Stephen Fry
          Eye Level Media - Commercial & Automotive Photography: www.EyeLevelSTL.com

          Comment

          Working...
          X