If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
that vibration could be your wheels out of alignment? or your tires misaligned from the crash.
I once replaced a bunch of my suspension thinking I would fix this weird vibration only to find out that I needed new tires...Goodyear Eagles are no good...Bridgestones FTW!
DEVOTE
__________________________________________ FS: Lokuputha's Stuff "It's more fun to drive a slow car fast than it is to drive a fast car slow."-The Smartest Man In The World
well, the tyres are new.. alignment is factory spec.
Im baffled by the vibrations. Theres also this grinding sound when i turn full lock left and reverse. It seems that my wheel is scraping the lower arm this never happened before.
hey blizz check your tie rod ends. when i did my 5 lug i used the right tie rod end on the left and the left tie rod end on the right so the rim/tires dont rub..
trust me it makes sense when your looking at it.
If not check your front hub/bearings one could be bad. this also has happened to me.
oh btw have you ever thought of putting a spacer in the rear to have a wider stance like the front.
I also did this since it looked weird to have the front stagger more then the rear. however doing this made me put longer studs for the lug nuts to tighten with more threads.
maury
:edit:
never mind about the rear spacers. with your watanbes its stance is perfect!
hey blizz check your tie rod ends. when i did my 5 lug i used the right tie rod end on the left and the left tie rod end on the right so the rim/tires dont rub..
trust me it makes sense when your looking at it.
If not check your front hub/bearings one could be bad. this also has happened to me.
oh btw have you ever thought of putting a spacer in the rear to have a wider stance like the front.
I also did this since it looked weird to have the front stagger more then the rear. however doing this made me put longer studs for the lug nuts to tighten with more threads.
maury
:edit:
never mind about the rear spacers. with your watanbes its stance is perfect!
yo maury, I'll try to do that! swap the tie rod ends eh?
Comment