Accordolictx : Evo'accord DX
My 97 H22a
Engine upgrades: N/A setup
-Swapped '97' (RED TOP) JDM H22A OBD1 conversion from da9b16's former CB7
-P2R.com heat sheild gasket
-Skunk 2 Intake Manifold (66mm inlet)
-BLOX 66mm throttle body
-Blue AEM intake with K&N dry filter
-MSD 8.5mm spark plug wires
-Spoon High Flow cata
-Bisimoto's H22 header (not installed)
-TSUDO full cataback exhuast system that's built slanted up to the right.Sounds so JDM!!!
-OEM Koyo version radiator (10% cooler than stock)
-Blue Gates performance radiator hoses
-Running power steering but no A/C
*Wanted*
*Add Bisi's Stage 2 performance cams, springs and retainers... Coming soon
*Move battery to the trunk... Coming soon
*Chipped ECU P28, P72 or Apexi NEO VAFC II.. Coming Soon
Transmission:
-5 speed conversion from auto
-Quaife LSD 5 speed Transmission
-Bisimoto's 8.9 lb. flywheel and 1MS clutch system
-Custom made stainless steele clutch line from Hosefast
Things I have...
*Apexi S- AFC II Blackface! (bought from desol11) gave to Judonoh
*Complete rebuilt/cleaned F22b/H23 DOHC head (bought from 93cbh22 07/23/07)
*Complete and cleaned F22b/H23 intake manifold (bought from 93cbh22 07/23/07)
*H23 all gaskets
*H23 P14/auto ECU
Suspension:
-ESP Motor mount kit painted Si Blue w/ Red inserts
-ESP Traction Bar painted Si Blue
-TEIN H- Tech type lowering springs
-Tikico Illumina 5- point adjustable shocks
-MEGAN Racing upper strut bar
-MEGAN Racing rear strut bar
-Suspension Technique Front/Rear sway bars... Coming soon
-Lee's former "18X7" ADR's wrapped in Nitto/Faulken tires
-"17X7" inch Enkei wheels wrapped in Kumho tires (Judonoh will be rolling these now as token of our friendship and his knowledge lol)
*Rear disc brake conversion... Coming soon
Body:
-VIS Racing Evo "Showoff" Front Bumper
-VIS Racing "Z3" Fenders
-VIS Racing "Extreme" Side Skirts
-VIS Racing "Extreme" Rear Bumper
-Mesh gril will be painted over
-Carbon Fiber "Lambo Styled" Side mirriors w/ LED's that flash w/ signals will be painted over
-Black JDM Projector Headlights
-Xenon High beam HID conversion kit
-JDM clear taillights from Shannon's "Beast"
-Paint job!- front needs a mild touch up (Original color)
-Carbon fiber eyelids- WANTED!
-Carbon fiber hood- WANTED!
Interior:
All stock currently and I'm slowly covering this area:
-Integra clocks (Two more left)
*Water, Temp, and Oil presure gauge will be added
*Racing seats w/ a new OEM rear leather seat
*Cabon fiber Bezel on cluster surround with a Blue (painted) bezel for my dash (07/25/07)
-Reverse Indiglow gauges for cluster w/ black dash installed
*TENZO Turismo sport steering wheel... comng soon
Future mods:
*New Stero setup
*Rear Disc Brake Conversion
*Maybe some boost
*Carbon Fiber parts
*Much more to come...
Here are a few throwback pics...
Back in 2003- 2005...
Then in 2006...
My 97 H22a
Engine upgrades: N/A setup
-Swapped '97' (RED TOP) JDM H22A OBD1 conversion from da9b16's former CB7
-P2R.com heat sheild gasket
-Skunk 2 Intake Manifold (66mm inlet)
-BLOX 66mm throttle body
-Blue AEM intake with K&N dry filter
-MSD 8.5mm spark plug wires
-Spoon High Flow cata
-Bisimoto's H22 header (not installed)
-TSUDO full cataback exhuast system that's built slanted up to the right.Sounds so JDM!!!
-OEM Koyo version radiator (10% cooler than stock)
-Blue Gates performance radiator hoses
-Running power steering but no A/C
*Wanted*
*Add Bisi's Stage 2 performance cams, springs and retainers... Coming soon
*Move battery to the trunk... Coming soon
*Chipped ECU P28, P72 or Apexi NEO VAFC II.. Coming Soon
Transmission:
-5 speed conversion from auto
-Quaife LSD 5 speed Transmission
-Bisimoto's 8.9 lb. flywheel and 1MS clutch system
-Custom made stainless steele clutch line from Hosefast
Things I have...
*Apexi S- AFC II Blackface! (bought from desol11) gave to Judonoh
*Complete rebuilt/cleaned F22b/H23 DOHC head (bought from 93cbh22 07/23/07)
*Complete and cleaned F22b/H23 intake manifold (bought from 93cbh22 07/23/07)
*H23 all gaskets
*H23 P14/auto ECU
Suspension:
-ESP Motor mount kit painted Si Blue w/ Red inserts
-ESP Traction Bar painted Si Blue
-TEIN H- Tech type lowering springs
-Tikico Illumina 5- point adjustable shocks
-MEGAN Racing upper strut bar
-MEGAN Racing rear strut bar
-Suspension Technique Front/Rear sway bars... Coming soon
-Lee's former "18X7" ADR's wrapped in Nitto/Faulken tires
-"17X7" inch Enkei wheels wrapped in Kumho tires (Judonoh will be rolling these now as token of our friendship and his knowledge lol)
*Rear disc brake conversion... Coming soon
Body:
-VIS Racing Evo "Showoff" Front Bumper
-VIS Racing "Z3" Fenders
-VIS Racing "Extreme" Side Skirts
-VIS Racing "Extreme" Rear Bumper
-Mesh gril will be painted over
-Carbon Fiber "Lambo Styled" Side mirriors w/ LED's that flash w/ signals will be painted over
-Black JDM Projector Headlights
-Xenon High beam HID conversion kit
-JDM clear taillights from Shannon's "Beast"
-Paint job!- front needs a mild touch up (Original color)
-Carbon fiber eyelids- WANTED!
-Carbon fiber hood- WANTED!
Interior:
All stock currently and I'm slowly covering this area:
-Integra clocks (Two more left)
*Water, Temp, and Oil presure gauge will be added
*Racing seats w/ a new OEM rear leather seat
*Cabon fiber Bezel on cluster surround with a Blue (painted) bezel for my dash (07/25/07)
-Reverse Indiglow gauges for cluster w/ black dash installed
*TENZO Turismo sport steering wheel... comng soon
Future mods:
*New Stero setup
*Rear Disc Brake Conversion
*Maybe some boost
*Carbon Fiber parts
*Much more to come...
Here are a few throwback pics...
Back in 2003- 2005...
Then in 2006...
Comment