April 2008 Nominations

[deevergote]

As the Accord of the Year for 2007, Ghost_2.2 is not eligible for AoM nomination in 2008. The other AoM winners from 2007 ARE allowed to be nominated. However, as they have already won the competition once, it is not recommended that they are nominated. Let's get some new cars recognized!

Check out the Rules & Regulations here - invalid nominations WILL be deleted!
Please observe the format for nomination displayed here


Members must have 50 posts in order to nominate someone
Duplicate nominations will be deleted
Posts made that are not nominations will be deleted
Invalid nominations will be deleted


There is no need to second a nomination! If a nomination is valid, it will proceed to the voting stage automatically.


PLEASE post nominations correctly. Invalid nominations WILL be deleted!


Please only post ONE picture with your nomination. More pictures can be seen in the Member's Rides thread you link to!

When nominating, please leave out any FUTURE PLANS sections. If it is not on the car, it should not be considered in the decision.





Also, this is not necessary... but it will help the mods out greatly. Please un-check the "show your signature" box when posting. When we make the voting thread, we remove all signatures (so they don't detract from the nominees). It'll save us a lot of time and effort (and help get things done on schedule!) if you do this! Thanks! - Mike

[ExplodingCake]

I nominate jdm_inspired for the AOM. He is very helpful to the people in need. He risks his time to get the job done even though he has to be late to get to work. Not many people do that. He installs authentic JDM good to his car , not some fake replicas. The name jdm_inpired fits him very well.






Engine Bay
- 94 JDM H22A VTEC
- Optima Red top
- McColloch H4 6000K HID kit
- M2A4 with Aftermarket "comes free with the complete swap" LSD
- Prelude AEM CAI polished and cut to SRI
- Blacktrax Stage 2 racing clutch
- Blacktrax 12 pound flywheel
- Skunk2 reservior covers
- DIY painted H22 valve cover
- Prelude Greddy header

Exterior
- JDM CB sidemarkers
- JDM Fenders
- JDM 92-93 one-piece headlights blackhoused with yellow retrofit
- Authentic G-Square Grill
- jdmkid's Carbon fiber hood (roll edged)
- 94-95 Accord EX front lip
- JDM powerfolding mirrors
- 92-93 sedan trunk conversion
- 92-93 Red/Clear tail lights
- EDM civic rear foglight "Thanks UKAccord"
- Apexi World Sport 2 catback (canister completely painted Flat-Black)
- Limo tinted rears, lightest tint in the front
- Debadged rear end and shaved H spot
- Rare Coupe Authentic Honda Rainguards
- 92-93 JDM foglights
- License plate relocator

Interior
- "Accord Coupe" badge on the dash
- Custom all amber gauges and buttons
- Grey Interior swap
- JDM armrest
- 90-91 Grey seat conversion swap
- Yeamans17's custom prelude short shifter powdercoated Black
- Spoon shift knob (Durocon)
-Broadway 300mm wide angle mirror


Suspension and Wheels
- Full Apexi World sport coilover kit
- Generic lower tie bar and rear and front strut bars painted red
- Generic "sliding" camber kit
- Ghetto washer camber sulution for the rears
- Work RSZ-R's 16x7 Gunmetal/polished lip
- 205/45/16 Yokohama AVS ES100's. Lovin' em.
- ITR/CD6 front brake caliper conversion painted Red
- Rear calipers painted Red
- Skunk2 extended wheel studs
- Chrono Kics titanium cast finish lugnuts

Audio and Electronics
- Pioneer AVIC-D1
- Rockford Fosgate p8004 amp
- 4 guage Monster cables
- 1 Farad Monster Cable capacitor w/digital Voltmeter
- Alpine Type-R 6x9 rears
- Alpine Type-R 6 1/2s in the front
- A whole car full of Bay Area music. YEEEEEEEEEEEEE!!!

[The G-Man]

I nominate 90cb7sleeper for AOM April 2008. Nic has a history of CB7s, most of them autotragic. Now at this point his 9293 Frost White LX finally has a working 5 speed H22A4 swap. This car has countless hours of work done on it (some of which I helped with). Nic has a lot into it and there is a lot more to come. Nic does what he wants to do with his car and not really what everyone else does. He also has some interesting future plans.

Member's ride link



Engine:
1997 USDM H22A4 Type SH w/ full OBD-1 Conversion
Auto to Manual conversion with Welding Method
USDM H23 Transmisson (M2S4)
Intermediate Shaft Adaptor plate
XTD Stage 3 clutch
Black 3" 92-96 prelude intake
K&N cone filter
Magnaflow High-Flow Catalytic Converter
No-Name Stainless Header
Block, Head And tranny painted Cast Coat Aluminum
No PS
Crzy.Tuning Chipped P06 with Crome
Power Rev Racing Intake Manifold Heatshield Gasket
Boot Leg Plenum Spacers

Suspension:
Megan Racing Rear strut bar
Neuspeed race springs
Tokico HP shocks
Ingalls anchor bolt style camber kit
Progress Rear sway bar
Integra 4040 proportioning valve
Rear disc brake swap

Wheels/Tires:
15" 5th Gen EX Seven spokes
15" Prelude Sawblades
17" Konig GT-R
Kuhmo 712 (215/45/17)
Falken Ziex 512 (195/60/15)

Exterior:
Red/clear taillights
92-93 JDM blackhoused one piece headlights with amber corners
JDM CB3 sidemarkers
Neuspeed and CB7tuner.com decals
DIY grill
DEPO OEM Foglights

Interior:
BB6 Prelude Gauge Cluster
BB4 Prelude Shifter- Entire Assembly
OEM blue cloth
DIY EDM door lights
Chrome Ebrake handle with knock off ITR boot
OEM ITR shift boot
Replica ITR Shift Knob
DIY battery reloction to trunk
Japanese Flag
270mm Broadway mirror

[hs06]

i nominated prNonVtec4u he has but alot of time and effort in this car to stand out knows his stuff to keep his motor fast, he a has a god taste jus let me on stuff on the car hopefully one day i can meet those standards





Mods List:

Engine:
JDM F22B DOHC complete swap
Bisimoto IM insulator
chipped p06 (thnx d112crzy and MRX for all your input)[in da works]
stock pt6(3-4degs. retarded) [current]
Custom 2 3/4 SR Intake w/ modded "air-routing" box
AEM Dryflow filter
Ebay header
Custom 2 1/4 inch piping
MeganRacing resonated test-pipe
Magnaflow 22" resonator
2 1/4 inch in/out OE replacement muffler
AC delete
PS delete
partial tuck(driver's side)
Balance Shaft belt delete
NOS Sniper Wet Kit (75shot)
B&M FPR w/ Vision Motorworks FPG(51psi WOT)
Walbro255lph HP fuel pump
MP1A tranny(non-LSD)
Exterior:
Amber corner lights
6000K hid kit
Customized front bumper
Lexus ES300 fogs
Mugen style CD front lip
DIY all-red tails
all black/gold H grill
Interior:
Nitrous arming switch
Bottle heater activation switch
Suspension/Wheels:
16" 8 spoke silver/polished
Fuzion HRIs front/Goodyear RSAs rear(205-55-16s)
Skunk2 lowering springs
Skunk2 struts(front, rears waiting)
Energy Suspension Hyperflex kit
Audio:
Sony X-plode deck
Pioneer mids
XM Radio
2 cheapy tweeters

[91 EX-R]

i would like to nominate lokuputha for AOM April 2008. his car has come such a long way and looks fantastic. check out his MR thread to check out all the progress he's made. plus, IMO, he has some of the sickest rims i have ever seen. enjoy!

http://www.cb7tuner.com/vbb/showthread.php?t=55640



MoD LisT:

ENGINE:
-1993 Honda Ascot 2.0Si DOHC F20A
-1993 Honda Ascot 2.0Si 5-Speed transmission
-150 hp @ 6100 RPM
-137 ft-lbs @ 5000 RPM
-Compression 9.5:1
-Bore: 85mm
-Stroke: 88mm
-Honda Gasket set
-Cruise Control Deleted
-A/C deleted...well not really...its broken
-DC sports 4-2-1 header
-Magnaflow Catalytic converter
-RS*R Exmag Stainless Steel Satin Black Cat-back Exhaust
-Prelude Starter motor
-Prelude Alternator
-DA Integra Airbox with 3-way intake tubing, Crown Vic Venturi Tube
-short throw stock height shifter from yeamans17 :: crazy mod! recommended
-Battery Trunk Relocation
-OEM CB7 drive shafts


EXTERIOR:
-Redone 90-91 Accord Color: Cappuccino Brown Metallic Clearcoat YR-501
-1995 Acura Legend Front Lower Lip
-1993 CB9 front bumper
-1991 CB Japanese 1-pc headligts
-1993 CB9 amber turn signals
-1993 CB9 fog lights :: check...too lazy to wire
-2.0Si badge
-Satin black accents & badges
-new windshield ::windy day + open hood = cracked
-new Original Honda Hood
-Junk Yard quarter panels
-rear fog lights or light :: check. now I need to install it.
-Honda OEM mud guards
-CB3 Chrome front Grill


INTERIOR:
-Original Honda Accord Light Beige Mouse-fur seats
-Brown Dash & Highlights (EX model)
-New Shift Boot!
-CB9 Fog light switch :: check...too lazy to install
-CB9 Half Antennae switch :: check...no antennae to install
-Tan Color Rear Speaker Pods
-Replacement Black Plastic dash
-Broken Speedometer :: check...too lazy to fix
-1st Gen ITR steering wheel :: great upgrade....highly recommended
-1991 Toyota AE92 Red Sports Seats ::working on integrating Accord lower brackets to the slide rails.

SUSPENSION/WHEELS:
-Ol'school Racing Hart D/Spec Superlative Racing Dish 16x7.5 with 35mm offset
-Bridgestone Potenza G009's 205/50-16 gummies
-Replacement Honda Ball joints and control arms
-Tein H-Tech Springs
-Tokico Blue, HP shocks
-Goodridge Stainless Steel Brake lines (a really good modification for any CB)
-Honda Rear Drum Assembly
-STracing Sway bars :: need to powdercoat them b4 install
-Poor-man's Big Brake Setup :: kiss the windshield::
-1994 Acura Vigor 11.1" front rotors
-1994 Acura Vigor Honda Remanufactured Caliper Assemblies
-1994 Acura Vigor Honda OEM Brake Pads


AUDIO/ELECTRONICS:
-Security....undisclosed military-style security system.
-Clarion Mp3 deck (will get model number)
-Clarion Pro Audio 6 1/2" components up front
-PPA 6 1/2" Mid Woofers with Planet Audio Crossover & Tweeters
-2 x PPA 6" 200watt acoustic subs :: check...too lazy to install; need 200watt amp and housing, a definite future DIY; guess where I am going to install them `-.__.-`"`-.__.-`"`-.__.-`"`-._
-15dB Radio Antenna Amplifier

[Shay91Racer]

I would like to nominate d112crzy for AOM April 2008. His car is hella sick, he's very helpful when it comes to information on tuning as well as info in general. He's done crazy work to his car and it shows. His name isn't d112crzy for nothing...

More Pics Here

Engine
-Rebuilt F22A1 block(first start on 3/2/08, 187,024 chassis miles)
-F22A6 head, resurfaced, 3-angle valve job, new valve stem seals, minor PnP
-JDM F22A camshaft(equivalent to the a6 maybe?)
-F22B IM/TB(H23 equivalent)
-5-speed M2A4(JDM H22)
-LSD clutch
-12lbs flywheel
-Generic CAI/SRI(changes with the weather)
-Generic 4-2-1 header
-Catco cat
-OBX Twin Loop muffler
-2.5" piping
-13" resonator
-stock pt3(will tune once fully broken in)
-A/C, P/S, C/C delete


Recent Maintenance
-OEM ignition switch
-SuperTech 5w30
-Honda oil filter
-IACV Cleaned
-FITV bi-passed
-Honda OEM timing belt kit(balance shaft belt delete)
-Honda OEM water pump
-Toga oil pump(supposed to be OEM spec, but it's stamped with a red "HV".)
-ACL std bearings
-Honda OEM std rings
-All new gaskets/seals
-OEM spec distributor
-NGK ZFR5-11 spark plugs gapped to .040"
-Duralast spark plug wires
-ARP head studs
-50/50 coolant mix
-180* thermostat
-rebuilt clutch slave cylinder
-Honda MTF



Interior
-Yeaman's short shifter
-Stock Shift Knob
-JDM ITR shift boot
-CEL switch
-PLX-M300 wideband
-JVC Headunit


Suspension/Control
-Nuespeed Race springs
-KYB AGX shocks/struts
-Progress rear sway
-Polyurethane bushings on front LCA's only
-Honda OEM front sway end-links
-Honda OEM LCA ball joints
-Prelude Vtec spirals
-Hankook K106 Radials 205/55R15


Exterior
-blackhoused headlights
-Amber Corners
-CB3 sidmarkers
-CD5 front lip
-Walmart radio-antenna
-NOKYA 9005 Yellow Headlight Bulbs
-Silverstar low beams

[Shinobi]

I nominate PRIMESNIPER for one of the cleanest rides in So. Cal. The amount of work and dedication to his CB is absolutely marvelous. He is one reason why i vow to myself to keep the cb and to make it such an amazing car. His CB is truly a role model to us So. Cal members.

http://www.cb7tuner.com/vbb/showthre...=1#post1365583



My 91 Ex ... THE LOST ANGEL
Auto-Manual Conversion
- JDM H22A
- JDM M2B4 LSD Manual Transmission
-H23A1 Manual Tension Conversion
- JDM P13 ECU
- A/C Complete
- Power Steering Complete
- BB4 Prelude Power Steering Line
- All brand new gaskets and seals on entire motor
- AEM Cold Air Intake
- DC 4-2-1 Ceramic Header
- Greddy SP1 Cat-Back Exhaust System
- Exedy Clutch
- Fidanza 8lb flywheel
- 5-spd Conversion Tranny Mount
- NGK Iridium Spark Plugs
- NGK Spark plug wires
- Hondata Intake Manifold Gasket
- Spoon Brake & Clutch Reservoir Sock
- Optima Blue Top Battery

Exterior:

- JDM 1 piece headlights with chrome trim
- JDM fog lights
- JDM bumper with chrome trim
- JDM side Moldings w/ Chrome Strip
- JDM Rear Taillights w/ Chrome Trim
- JDM side Markers
- JDM Power Folding Mirrors
- JDM BB4 OEM VIN Tag
- Honda of America badges
- OEM Rear Flush Mount
- OEM Complete Front Nose Mask
- OEM Moon Roof visor (sold)
- OEM Mud Flaps
- Xenon Mild Lip Front Spoiler
- OEM EX front Lip (removed)
- OEM CD5 Lip (removed)
- OEM 'DOHC VTEC' decal
- OEM 6 year old resprayed Frost white
- Shaved 'Accord' & 'EX' badges
- JAF (Japan Automotive Federation) Badge

Interior

- OEM Blue Interior
- OEM CB7 Floor mats
- Neuspeed Short Shifter
- Trust/Greddy Shift knob
- OEM 99 Civic Si shift boot w/chrome trim
- JDM CB7 Map Light
-JDM Sun Visors
- CB9 Blue Arm Rest w/ Cup Holders
- Arospeed Floor Bar
- Wakaba leaf badge
- Carpet-Lickin' Clean Interior
- Air Spencer with CS-X3 Squash

Lighting & Electronics:

- Optima Blue Top Battery
- Fosgate 2 Gauge Wiring
- Catz 4300k H4 HID kit
- PIAA Super White #19168 corner bulbs
- PIAA H1 Extreme White Plus# 11655
- PIAA H3 Extreme White Plus #15224 Fog light bulbs
- Alarm (hum ,“click clack”!)

Suspension / Wheels:

- Racing Hart Type C2 (3 piece)
- 205/45/17 Kumho Ecsta SPT
- Ground Control Coilovers
- KYB AGX Adjustable Shocks
- SPC +3 Degree Anchor Bolts Front Camber kit
- DC Front Strut Tower Bar
- DC Rear Upper Strut Tower Bar
- DC Rear Lower Tie Bar
- 92 CB Rear Wheel Disc Conversion
- Power Slot Rear Rotors

[steelbluesleepR]

Bille

I would like to nominate Bille's car, it is a very clean, unique cb7 with a ton of DIY, one-off parts. in my opinion he has the best looking kit on the board, and he built it from scratch. he has given me a lot of ideas of what to do with my car, and is a great inspiration to other cb7tuners.

http://www.cb7tuner.com/vbb/showthread.php?t=14110



Engine: H22 NA

-H22A
-H22 Tranny
-Ecu-AEM.
-Shift Light, Launch Control.
-Dc-Sport Manifold 4-2-1 with 2,5" collector.
-2,5" Exhaust wiht 400cel Race catalytic Converter.(made by Bille)
-Fuel Pressure Regulator.
-Oil CatchTank.
-HeatWrap on manifold.
-Carbon Fiber Spark Plug Cover. (made by C.P.)
-NGK Spark Plugs (Platinum)
-NGK Spark Plugs Cabel (Blue)
-K&N AirFilter (RE-0810)
-Short Air Intake (By Bille)

7/7-2007
208Hk / 7167Rpm
219Nm / 5400Rpm


Interior:

-JDM Recaro, Integra type R
-Momo Steering Wheel (Tuner, from NSX Type R)
-Snap off Steering Wheel
-JDM Type R shift knob
-JDM Integra Shift Boot
-Oil temp Guage
-Oil Pressure Guage
-Interior light in the back from a Rover 820
-Interior Light in front from a Honda Shuttle


Suspension:

-H&R springs 3" drop
-Koni
-Camberkit front and rear
-Brembo brakes front 282mm and rear 260mm (drilled)


Future Mods:

-Skunk2 Camshaft, Stage II
-Skunk2 Valve Spring Set
-Skunk2 Retainer Set
-Skunk2 Camgear

-KW 2 Suspension

-Big brake kit


Exterior:

-Front bumper (By Bille) from Accord 93' and civic 95' parts.
-Rear bumper (By Bille)From Accord 93' and Accord 99' parts.
hood( By Bille)
-Front poiler from Civic 95'
-Black headlights with xenon 8000K (By Bille)
-JDM Black Corner Lights
-88 CIVIC/CRX Black Signal Bumper Lights
-Color (Peugeot Bleu De Rhodes) and (Violet Effect)


Wheels:

-7x17" Kosei - Toyo 215/40-17.


Audio/Electronics:

-Sony MD/CD
-Boston
-Denon DCA800