October 2012 AOM Nominations

[JoshM]

October 2012 AOM Nominations
--------------------------------------------------------------------------------

As the Accord of the Year for 2011, jdmtrickcb7, as well as past 2012 winners, are not eligible for AoM nomination in 2012. The other AOM winners from 2011 ARE allowed to be nominated. However, as they have already won the competition once, it is not recommended that they are nominated again. Let's get some new CBs recognized!


Check out the Rules & Regulations - invalid nominations WILL be deleted!
Please observe the format for nomination displayed here.

Members must have 50 posts in order to nominate someone.
Duplicate nominations will be deleted.
Posts made that are not nominations will be deleted.
Invalid nominations will be deleted.


There is no need to second a nomination! If a nomination is valid, it will proceed to the voting stage automatically.

Please only post ONE picture with your nomination. More pictures can be seen in the Member's Rides thread you link to!

When nominating, please leave out any FUTURE PLANS sections. If it is not on the car, it should not be considered in the decision.

[crazymikey]

I'd like to nominate fellow Canadian, raf99.

Very clean overall look, engine swap with a beautiful bay, working on some custom audio and the guy absolutely loves to spend time working on his car, and it shows.





http://www.cb7tuner.com/vbb/showthread.php?t=139375

Engine & Components

JDM H22A engine
Skunk2 intake manifold
5 speed H22A tranny
Manual tensioner fix
P06 ECU
Darton sleeves
Eagle H rods
Arias forged pistons (8:5:1)
Cometic head gasket
ARP main studs
Cometic lower engine gasket kit
Endyne oil pump
Greddy timing belt
Greddy balancer belt
Fenco radiator
H22A 68mm throttle body
NGK Iridium spark plugs
Re-surfaced flywheel
Bully stage 4 clutch

Ractive air intake
Battery relocation
Fuse Box relocation
Wire tuck
A/C full delete
OEM intake full removal
EGR/Canister full removal
2.25" Full catback exhaust w/
Flowmaster muffler


Exterior

2.25" Eibach lowering springs -front
2" Eibach lowering springs - rear
KYB GR2 shocks
Ractive front upper strut bar
Ractive rear upper strut bar
Ractive rear lower tie bar
Ractive short ram air intake
Clear bumper signal lights
JDM side marker lights
17" RTX Poisen Series rims
EBC Front drilled and slotted rotors
Front Hawk brake pads
80% tint on rear windows and back window
4 Window wind visors
Shaved antenna
Shaved logos
91 DIY front grill
95 JDM Honda Accord front lip
95 Accord EXR rear lip

Interior

Interior neon lighting under dash and seats
Alpine MRV-1507 class D amp
2 x 400W Clarion 10" subs
Alpine Flex5 MRP-F365 amp
Qlogic corner enclosures w/
Alpine crossovers w/
Alpine 300W 6-1/2" 2-Way component speakers w/ tweeters
Pioneer 180W 6 1/2" rear speakers
Pioneer 140W 5 1/4" front speakers
Alpine I-Pod interface adapter

Dyed black floor mats
Dyed black mat of rear seat
Complete DIY trunk redo with black fabric

[Hostile]

SanJoCaF22DrAcc

This is one of my favorite cb's on here that has not got the aotm. Built F22, clean engine bay, Sprint Hart CP-R's, and all the DC Sports parts anyone can want. His blacked out front end and attention to detail makes his coupe stand out. This car is really well put together and Carlos is a really cool guy.

http://www.cb7tuner.com/vbb/showthread.php?t=180919


Engine: f22a4, 5spd mt

Custom green painted valve cover
AEM CAI
H22ax throttle body(not installed)
H22ax plenum(not installed)
F22a6 spacer/butterflies(not installed)
F22a6 runners(not installed)
BlackTraxx IAB spacer(not installed)
Bisimoto V2 ceramic coated header(not installed)
KTeller 2 1/2" stainless steel mandrel bent plumbing(not installed)
Ported and polished head
ARP H23 head stud set
Bisimoto pro springs
Bisimoto level 2 cam
AEM adjustable timing gear
AEM power pulleys
DC Sports EX header
DC Sports cat back exhaust
DC Sports battery hold down
DC Sports oil cap
Optima Battery


Suspension

Tokiko illuminas
Eibach sportline springs
GSR front adjustable camber kit
CD5 rear lower control arms
CD5 rear lower toe adjusting arms
DIY rear upper control arm washer trick
Suspension Techniques front & rear sway bar set
DC Sports front strut tower brace
DC Sports rear strut tower brace
DC Sports rear lower tie bar
Energy Suspension master urethane set

Brakes

Front:
Centric drilled and slotted rotors
Porterfield RS4 pads
Duplicolor red caliper paint kit
Rear:
Disc brake conversion
Powerslot rotors

Rollers

•16x7,4x114.3,+40 Sprint Hart CP-R, wrapped in 215/45r16 Falken Azenis 615k (not installed)
•18x8,4x114.3&5x114.3,+42 Racing Hart EVO C4, wrapped in 215/40r18 Yokohama Prada Spec2 (not installed)
•stock 195/60r15 wrapped in Yokohama


Exterior

91 Honda Accord EX coupe, Frost White

JDM retracting mirrors
Custom DIY USDM 90/91 factory fog lights black housed and yellow capped bulbs
Custom JDM black accented fog light lenses (not installed)
DIY USDM front grill blacked out
JDM 90/91 grill (not installed)
Red eBay front Honda Badge
PIAA Xtream 9006 bulbs
eBay clear / DIY custom black housed turn signals with amber bulbs
APC clear turn signals with amber bulbs (not installed)
DIY eBay euro clear corner lenses, custom black housings, with added and modified light diffuser
APC euro clear corner lenses with PIAA yellow bulbs and super white bulbs (not installed)
OEM 92/93 hood bra (not installed)
Rear eBay clear/red tail lamps
OEM flushmount rear lip
OEM rear mudflaps
Silblade silicone white on white wiper blades
JDM 1 piece headlamps 90/91 (not installed)
JDM 1 piece headlamps 92/93S SOLD : (
JDM OEM sidemarker (not installed)
92/93 grill (not installed)

Interior: stock Honda Blue
Tuning Shop aluminum dial rings(acquired)
Varad lighting led's (aqua)

Trunk: bare

Varad lighting led's (blue)
Dynomat

Audio

Clarion HU VRX765VD
Boston Acoustics Pro 6.5.2 components (not installed)
JL audio 6x9
Phoenix Gold XS4300 (not installed)
Phoenix Gold XS2500 (x2) (not installed)
Phoenix Gold XS fuse block (not installed)
Monster Cable

[SPLCB7]

I'd like to nominate Phantomcb7 his car is everything a cb7 should be.....



http://www.cb7tuner.com/vbb/showthread.php?t=137030

Engine Mods:

Old Setup:

F22 [R.I.P.] -2.25" catback exhaust (w/Magnaflow muffler) -Spectre Filter -CAI piping -Polished heatshield

New Setup:

[Installed]JDM H22 [Installed]Chipped P28 [Installed]-M2F4 USDM H22 Tranny [Installed]-New pistons [Installed]-XTD Stage 2 Clutch [Installed]-A/C and Power Steering Delete [Installed]-ESP motor Mounts [Installed]-Cool Air Intake [Installed]-DIY Oil Catch Can [Installed]-Greddy Header and Downpipe [Installed]-2.25" catback exhaust (w/Magnaflow muffler) [Installed]-Full Wire Tuck

Exterior Mods:

[Installed]-90/91 OEM Fogs [Installed]-90/91 One Piece Headlights [Installed]-DIY Black Grill w/ Accord Badge [Installed]-90/91 OEM Mudguards [Installed]-92/93 Trunk Swap [Installed]-95 Legend Lip [Installed]-Black Housed Bumper Lenses(Broken) [Installed]-92/93 All Red Taillights [Installed]-S2000 Antenna [Installed]-CD5 Rear Sidemarkers [Installed]-Door Lock Delete [Installed]-Window Visors [Installed]-Legend Hood Dampeners [Installed]-5% Tint [Installed]-Cb Side markers [Not Installed]-90/91 Trunk [Not Installed]-93 Legend Lip

Interior Mods:

[Installed]-Clifford Alarm System [Installed]-Black Leather RSX Seats [Installed]-DIY Black Interior [Installed]-Diy Short Shifter [Installed]-Aftermarket Steering Wheel [Installed]-Beige Door Lock Trim [Installed]-Beige Dash Bezel [Installed]-DIY Neons Underdash [Installed]-DIY Smoked Courtesy Lenses [Installed]-Pioneer Aftermarket Deck [Installed]-6in and 6/9 Infinity Aftermarket Speakers [Installed]-SE Black Leather Door Inserts [Installed]-Leather Door Inserts [Installed]-Leather Armrest [Installed]-Window Visors [Installed]-BB6 Cluster [Installed]-BB6 shifter Plate

Suspension Mods:

[Installed]F&F TYPE 2'S [Installed]-SE Rear Disc Conversion [Installed]-Rear Sway Bar

Wheels:

[Not Installed]-14" Stock Steelies [Installed]17" Adr Phantoms(Currently Black) (sold to:90ACCORDLXGUY)-15" Prime 293 [sold to:91kid]-17" Rotas