Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Yes, I was partially confused by that, but also that my wiring colors at the fusebox disagree with the haynes service manual. What makes it more confusing to me is that pin 2 is blu/blk but pin 4 isnt,...
-
I have 14awg, but at the distance, its slightly below the 20amp fuse rating, so I stepped it up to 12 for headroom.
I havent attempted repair yet because I stumbled upon something really...
Leave a comment:
-
I have 14awg, but at the distance, its slightly below the 20amp fuse rating, so I stepped it up to 12 for headroom.
I havent attempted repair yet because I stumbled upon something really...
Leave a comment:
-
Thanks for the comment. Ive been checking back here daily hoping someone would have some advice before I had time to do the repair. I have kept the paperclip in the connector so that I can check for continuity...
Leave a comment:
-
I tested everything in the circuit again, the blu wire to the fusebox after the y split from the thermosensor/restoftheblucircuit,tofantimer is bad. no continuity, but continuity between everything else....
Leave a comment:
No activity results to display
Show More
Leave a comment: