My girlfriend has a BB1 (VTEC) that has a F22B1 that was swapped into her car because the H22 took a dump. Long story short she traded and ended up with this BB1. There are 3 things so far that aren't hooked up to this engine.
1. Map Sensor
2. What looks to be like a temp sensor (I would infer so as it it similar to the F22A/H22A ect)
3. And a 3rd plug that is also where a coolant hose is.
My question is this: Since the previous own used the H22 Harness what would need to be changed or how would one fix this issue of the misfire and the lack of Map sensor?
1. Map Sensor
2. What looks to be like a temp sensor (I would infer so as it it similar to the F22A/H22A ect)
3. And a 3rd plug that is also where a coolant hose is.
My question is this: Since the previous own used the H22 Harness what would need to be changed or how would one fix this issue of the misfire and the lack of Map sensor?
Comment