Just to make sure I'm understanding you correctly, but you're asking where to run the additional two wires for the variable intermittent function?
The way I understood your intention was that you were getting pins for the blue column subharness connector (which is really the headlight/signal switch connector, but close enough together that it shouldn't matter) and running the two of them through that. Then on down to the green ICU connector into pins 6 and 7.
Are you asking something else?
EDIT*** Yes, those are the correct pins. Pins 6 and 7. You read the connector from the back with the clip side up. And it won't matter which of the two wires you'll connect to coming from the switch.
And yes, the goal is to use this switch in the CB. I'm currently soliciting some help on the matter from cp[mike], as my diagram reading skills could use some work, but I'm thinking it should be fine. I'm trying to adapt the whole column, combination switch, ignition, steering wheel and airbag from a newer car, though. I have no idea if the Civic switch I'm using would fit the Accord. My guess is no.
Any info on the module you're running for the folding mirrors?
The way I understood your intention was that you were getting pins for the blue column subharness connector (which is really the headlight/signal switch connector, but close enough together that it shouldn't matter) and running the two of them through that. Then on down to the green ICU connector into pins 6 and 7.
Are you asking something else?
EDIT*** Yes, those are the correct pins. Pins 6 and 7. You read the connector from the back with the clip side up. And it won't matter which of the two wires you'll connect to coming from the switch.
And yes, the goal is to use this switch in the CB. I'm currently soliciting some help on the matter from cp[mike], as my diagram reading skills could use some work, but I'm thinking it should be fine. I'm trying to adapt the whole column, combination switch, ignition, steering wheel and airbag from a newer car, though. I have no idea if the Civic switch I'm using would fit the Accord. My guess is no.
Any info on the module you're running for the folding mirrors?
Comment