Best way to put on emblems?

[LordXaero]

Looking for a quick answer, and not sure where I would put this.

I recently painted my trunk, and all the emblems are removed, and I am trying to find a good way to put them back on.

What do you guys use for putting emblems back on to make sure they stay through bad weather, car washes, etc.

Thanks.

[JoshM]

Hulk strength double sided tape. 3M is pretty good, and commonly used. Or you could just use some super glue if you don't intend to take the emblems back off.

[crazymikey]

I just use contact cement.

[kit-to-lip]

local auto parts stores have a glue made for emblems, holds them on and doesnt pull the paint if u take them back off.

[DJ metadelic]

I've tried 3M double stick tape. Didn't work. There are some amazing products out there, I used 5 minute epoxy on my last set of emblems, because I wanted to leave them on so didn't mind it being permanent.

[tommi]

I've tried 3M double stick tape. Didn't work. There are some amazing products out there, I used 5 minute epoxy on my last set of emblems, because I wanted to leave them on so didn't mind it being permanent.

the surface probably wasnt clean when u tried to stick it on. i used that on my 2.2i emblem and its never came off. if anything a lil trick with a heatgun right to the double sided tape before sticking on will do the trick. making it all tacky to apply.

[Bullhorn7]

I used Gorilla glue on the v6 emblem. Still on there after 2 years.

[DJ metadelic]

Each mating surface was clean, but under that particular circumstance just didn't want to adhere. Probably too humid or cold it was the end of November when I did it.

Metal cement maybe? I've used gorilla glue for something else before, works wonders. But damn, that'd be a wee bit too permanent too I would assume. So it depends.

[Joshy]

3M double-sided foam tape, automotive grade. It MUST be applied at 50°F+ in order to set properly. Also, be sure to use rubbing alcohol on both your emblem and mounting point on the car. The alcohol will help activate the tape.

[Night Wolf]

the surface probably wasnt clean when u tried to stick it on. i used that on my 2.2i emblem and its never came off.

x2! I still got emblems on that way